Quick Start Manual

4
Installation
9
Setup for Windows Vista
Read the License Agreement, C.
and click Next to continue the
installation.
Locate an available USB slot on your D.
computer.
Insert the Adapter into the slot until
it locks into place.
Click Next.
After you install the Adapter E.
correctly, the Congratulations
screen appears.
Click Finish.
If your computer runs Windows XP or 2000, proceed to step 2, “Setup for F.
Windows XP or 2000”.
If your computer runs Windows Vista, proceed to step 3, “Setup for
Windows Vista”.
License Agreement
Insert the Adapter
Congratulations
This screen appears when you are E.
connected to your network.
Select Save this network, if you
want to save your settings.
Click Close.
The F. Set Network Location screen
may appear to help apply the
correct settings for your type of
location. If it doesn’t appear, go to
step H.
Select Home, Work, or Public
location.
This screen varies according to the G.
selected location.
Click Close.
Connected to Network
Select Network Location
Network Settings Saved