User Guide WRT3200ACM MU-MIMO Gigabit Wi-Fi Router 1
Contents Product Overview ................................................................................................... 3 Front view................................................................................................................................................... 3 Back view.................................................................................................................................................... 5 Avoid Overheating...............................................
Product Overview Front view LIN
Front panel (1) Power indicator—(White) The icon LED is solid white while the router is powered on. It will blink when the router goes through its self-diagnostic mode during every boot-up. (2) Internet Indicator—(White/Amber) The Internet LED is solid white when connected to the Internet. It blinks white while the router works to establish a connection. A solid amber LED indicates the connection is down due to configuration issues.
(9) ETHERNET 1 through 4 (Primary)—(White) These numbered LEDs correspond with the numbered ports on the router’s back panel. If the white LED is solid, the router is connected to a device through that port. A flashing white LED indicates network activity over that port. (10) ETHERNET 1 through 4 (Secondary)—(White) If the white LED is off, the router is successfully connected to a device through that port at 10/100 Mbps.
(3) Ethernet ports—Connect Ethernet cables to these blue gigabit (10/100/1000) ports, and to wired devices on your network. Note—For best performance, use CAT5e or higher rated cables on the Ethernet ports. (4) Internet port—Connect an Ethernet cable to this yellow gigabit (10/100/1000) port, and to a broadband Internet cable/DSL or fiber modem. Note—For best performance, use CAT5e or higher rated cables on the Internet port. (5) USB 3.
Avoid Overheating Wall-Mounting Placement The router has wall-mount slots on the bottom of each foot for flexibility in mounting the router on the wall. The distance between the slots on the short side is 104 mm. The distance between the slots on the longer side is 210 mm. Two screws are needed to mount the router. Note—Linksys is not responsible for damages incurred by unsecured wall-mounting hardware. Mounting Instructions 1.
2. Before drilling holes, choose the template (short side or long side) that fits your installation. Drill the holes using the correct template. 3. Insert a screw into each hole and leave 4 mm of its head exposed. 4. Position the router so the wall-mount slots line up with the two screws. 5. Place the wall-mount slots over the screws and slide the router down until the screws fit snugly into the wall-mount slots.
Wall-Mounting Template Print this page at 100% size. Place on the wall with desired router position and mark screw locations.
Setting Up: Basics Where to find more help In addition to this user guide, you can find help at these locations: x Linksys.com/support/WRT3200ACM support, live chat, forums) x Linksys Smart Wi-Fi help (connect to Linksys Smart Wi-Fi, then click Help at the top of the screen) (documentation, downloads, FAQs, technical Note—Licenses and notices for third party software used in this product may be viewed on http://support.linksys.com/en-us/license. Please contact http://support.linksys.
5. Open a web browser to launch the Linksys Smart Wi-Fi Router setup instructions. If you don’t see the instructions, type linksyssmartwifi.com in the address bar. At the end of setup, follow the on-screen instructions to set up your Linksys Smart Wi-Fi account. Use Linksys Smart Wi-Fi to configure your router from any computer with an Internet connection.
2.
How to Use Linksys Smart Wi-Fi You can configure your router from anywhere in the world by using Linksys Smart Wi-Fi, but you can also configure your router directly from your home network. Linksys Smart Wi-Fi may be available for your mobile device, as well. See your device’s app store for information. How to connect to Linksys Smart Wi-Fi To connect to Linksys Smart Wi-Fi: 1. Open your computer’s web browser. 2. Go to www.linksyssmartwifi.com and log in to your account.
Network Map Lets you display and manage all network devices connected to your router. You can view devices on your main network and your guest network, or display information about each device. Guest Access Lets you configure and monitor a network that guests can use without accessing all of your network resources.
Parental Controls Lets you block web sites and set Internet access times. Media Prioritization Lets you set which devices and applications have top priority for your network traffic.
Speed Test Lets you test your network’s Internet connection speed. External Storage Lets you access an attached USB drive (not included) and set up file sharing, a media server, and FTP access.
Connectivity Lets you configure basic and advanced network settings. Troubleshooting Lets you diagnose problems with your router and check the status of the network.
Wireless Lets you configure your router’s wireless network. You can change the security mode, password, MAC filtering, and connect devices using Wi-Fi Protected Setup™. Security Lets you configure your router’s wireless security. You can set up the firewall, VPN settings, and make custom settings for applications and games.
Troubleshooting You can find more help from our award-winning customer support at Linksys.com/support/WRT3200ACM. Your router was not successfully set up If Linksys Smart Wi-Fi did not complete the setup, you can try the following: x Press and hold the Reset button on your router with a paperclip or pin until the LED starts blinking (about 10 seconds). Install the router again. x Temporarily disable your computer’s firewall (see the security software’s instructions for help). Install the router again.
x Make sure that your modem is connected to power and is turned on. If it has a power switch, make sure that it is set to the ON or l (as opposed to O) position. x If your Internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP. x If your Internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port. x If your computer was previously connected to your modem with a USB cable, disconnect the USB cable.
To fix the problem on Windows computers, do the following*: 1. On your Windows desktop, click on the wireless icon in the system tray. A list of available networks will appear. 2. Click your own network name. Click Connect. In the example below, the computer was connected to another wireless network named wraith_5GHz. The wireless network name of the Linksys WRT3200ACM router, Damaged_Beez2.4 in this example, is shown selected. 3.
To fix the problem on Mac computers, do the following: 1. In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks will appear. Linksys Smart Wi-Fi has automatically assigned your network a name. 2. In the example below, the computer was connected to another wireless network named wraith_5GHz. The wireless network name of the Linksys WRT3200ACM router, Damaged_Beez2.4 in this example, is shown selected. 3.
The most common method of troubleshooting your router is to turn it off, then back on again. Your router can then reload its custom settings, and other devices (such as the modem) will be able to rediscover the router and communicate with it. This process is called rebooting. To reboot your router using the power cord, do the following: 1. Disconnect the power cord from the router and the modem. 2. Wait 10 seconds, and reconnect the power cord to the modem. Make sure it has power. 3.
Specifications Linksys WRT3200ACM Model Name Linksys MU-MIMO Gigabit Wi-Fi Router Description Dual-Band AC Router with Gigabit and 2×USB Model Number WRT3200ACM Switch Port Speed 10/100/1000 Mbps (Gigabit Ethernet) Radio Frequency 2.4 GHz and 5 GHz # of Antennas 4 external adjustable antennas Ports Power, USB 3.0, Combo USB 2.0/eSATA, Internet, Ethernet (1-4), RP-SMA (4) Buttons Reset, Wi-Fi Protected Setup, Power Front Panel Indicators Power, Internet, 2.
Notes: For regulatory, warranty, and safety information, see the CD that came with your router or go to Linksys.com/support/WRT3200ACM. Specifications are subject to change without notice. Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage.
QUICK START GUIDE MT~3200 ACM MU-MIMO GIGABIT Wi-Fi ROUTER LIN
If replacing an existing router, disconnect that router first. 1 Connect antennas as pictured . Power on the router. Users in multi-story environments may try different antenna orientations to improve signal strength. 2 Connect the Internet cable from your modem to the yello~JNTERNET port on the router. Wait until the power light on the front of the router is solid.
3 Connect to the secure wireless network name on the sticker. (You can change these details later.) Select the option to automatically connect to this network in the future . You will not have Internet access until you complete router setup (see Step 4). Wireless Network: Linksys00657 1111111111111111111111111111111111111111111111 Wireless Password: IIIII 4 Open a web browser to launch Linksys Smart Wi-Fi router setup instructions. If you do not see the instructions, type http://LinksysSmartWiFi.
WARRANTY AND SUPPORT INFORMATION UNITED STATES AND CANADA
UNITED STATES AND CANADA WARRANTY AND SUPPORT INFORMATION IMPORTANT! PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT WARRANTY INFORMATION LIMITED WARRANTY (UNITED STATES AND CANADA) This warranty is provided to you by Belkin International, Inc, or one of its subsidiaries or affiliates (“Belkin”) IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTS The benefits we give in this manufacturer’s warranty are additional to any rights and remedies that you may have under local consumer protection laws.
UNITED STATES AND CANADA • that the product, software or services, or any equipment, system or network on which the product, software or services are used are 100% secure and cannot be hacked; or • that a third party service the product needs will always be available. Note: Although Belkin does not make these promises in this warranty, you may have additional rights under consumer laws.
UNITED STATES AND CANADA PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS OR REVENUE, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR LOSS OF ABILITY TO USE ANY THIRD PARTY PRODUCTS OR SERVICES, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER), REGARDLESS OF THE THEORY OF LIABLITY (CONTRACT, TORT OR OTHERWISE) AR
UNITED STATES AND CANADA BELKIN TECHNICAL AND WARRANTY SUPPORT INFORMATION HOW DO I GET HELP? If you have a question about your product or experience a problem with it, please go to http://www.belkin.com/support or http://support.linksys.com. You will find lots of online support tools and information to help you with your product. What should I do if my product is defective? You always have the option to return the product to the original seller if you have a problem.
UNITED STATES AND CANADA Belkin provides many different options to support you. Please click on or go to the appropriate website below for more details. Please make sure to change to your local country if necessary. • Belkin and WeMo Products: http://www.belkin.com/support • Linksys Products: http://support.linksys.com Along with the Limited Warranty, Belkin provides Complimentary Assisted Technical Support for the Warranty Period to get your hardware up and running.
