User Manual

98
6. After the files have been successfully copied, the screen in Figure 4-6 will
appear. Click the Exit button
7. Odyssey Client will now automatically install its utility on your PC to enable Wi-
Fi Protected Access (WPA). An icon will appear on your system tray. Click this
icon to configure your WPA settings. For more information on this software,
refer to their documentation on the CD-ROM.
Proceed to “Chapter 5: Hardware Installation.”
Figure 4-6
4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc
Mode, select the correct operating channel for your network from the
Channel drop-down menu. Then, select the Network Mode from the drop-
down menu. Click the Next button, and go to Step 5. Click the Back but-
ton to change any settings.
Channel - The channel you choose should match the channel set on the
other devices in your wireless network. If you are unsure about which chan-
nel to use, select the default channel (Channel 6).
Network Mode - Select Mixed Mode, and both Wireless-G and Wireless-
B computers will be allowed on the network, but the speed will be reduced.
Select G-Only Modefor maximum speed, but no Wireless-B users will be
allowed on the network.
5. The Setup Wizard will ask you to review your settings before it starts to
copy files. Click the Next button to save these settings, or click the Back
button to change any settings.(See Figure 4-5.)
Figure 4-4
Figure 4-5