User Manual

1. To install the Adapter, click the Setupbutton on theWelcome screen, Figure

4-1. Click User Guide to view the User Guide or click Exit to exit the

Setup Wizard.

2. Read the License Agreement and click the Next button to continue the

installation. If you click the Cancel button, you will end the installation.

Setup Wizard Instructions for Windows 98SE, Me, and 2000

Figure 4-2

3. The Setup Wizard will ask you to choose a wireless mode. (See Figure 4-

3.) Click the Infrastructure Mode radio button if you want your wireless

computers to network with computers on your wired network using a wire-

less access point. Click the Ad-Hoc Mode radio button if you want multi-

ple wireless computers to network directly with each other. Do not use the

Ad-Hoc mode if you want your wireless computers to communicate with

computers on your wired network.

In the SSID field, enter the SSID (Service Set Identifier) of your wireless

network. The SSID is your network name and must be identical for all

devices in the network. The default setting is linksys (all lowercase). Click

the Nextbutton to continue, or click the Back button to return to the previ-

ous page.

Figure 4-3