® A Division of Cisco Systems, Inc. 2.4 GHz Wireless-G 802.11g Media Storage Link Router WIRELESS Model No.
Wireless-G Media Storage Link Router with SpeedBooster Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
Wireless-G Media Storage Link Router with SpeedBooster Table of Contents Chapter 1: Introduction Welcome What’s in this User Guide? Chapter 2: Planning Your Wireless Network Network Topology Ad-Hoc versus Infrastructure Mode Network Layout Chapter 3: Getting to Know the Wireless-G Media Storage Link Router The Back Panel The Front Panel Chapter 4: Connecting the Wireless-G Media Storage Link Router Instructions for Connecting the Router Placement Options Chapter 5: Configuring the Wireless-G Media Stor
Wireless-G Media Storage Link Router with SpeedBooster The Applications and Gaming Tab - DMZ The Applications and Gaming Tab - QoS The Administration Tab - Management The Administration Tab - Log The Administration Tab - Diagnostics The Administration Tab - Factory Defaults The Administration Tab - Firmware Upgrade The Administration Tab - Config Management The Status Tab - Router The Status Tab - Local Network The Status Tab - Wireless Appendix A: Troubleshooting Common Problems and Solutions Frequently
Wireless-G Media Storage Link Router with SpeedBooster List of Figures Figure 3-1: The Router’s Back Panel Figure 3-2: The Router’s Front Panel Figure 4-1: Connect the USB Disk Figure 4-2: Connect the Broadband Modem Figure 4-3: Connect Your Network Devices Figure 4-4: Connect the Power Figure 4-5: Stand in Closed Position Figure 4-6: Wall-Mount Slots Figure 5-1: Login Screen Figure 5-2: Setup Tab - Basic Setup Figure 5-3: DHCP Connection Type Figure 5-4: Static IP Connection Type Figure 5-5: PPPoE Connect
Wireless-G Media Storage Link Router with SpeedBooster Figure 5-24: Wireless Tab - Wireless Security (WPA2 Enterprise) Figure 5-25: Wireless Tab - Wireless Security (RADIUS) Figure 5-26: Wireless Tab - Wireless Security (WEP) Figure 5-27: Wireless Tab - Wireless MAC Filter Figure 5-28: MAC Address Filter List Figure 5-29: Wireless Tab - Advanced Wireless Settings Figure 5-30: Security Tab - Firewall Figure 5-31: Security Tab - VPN Passthrough Figure 5-32: Storage Tab - Disk Figure 5-33: Claim Disk Figure 5
Wireless-G Media Storage Link Router with SpeedBooster Figure 5-58: The Traceroute Test Figure 5-59: Administration Tab - Factory Defaults Figure 5-60: Administration Tab - Firmware Upgrade Figure 5-61: Administration Tab - Config Management Figure 5-62: Status Tab - Router Figure 5-63: Status Tab - Local Network Figure 5-64: DHCP Clients Table Figure 5-65: Status Tab - Wireless Figure C-1: Upgrade Firmware Figure E-1: IP Configuration Screen Figure E-2: MAC Address/Adapter Address Figure E-3: MAC Address/
Wireless-G Media Storage Link Router with SpeedBooster Chapter 1: Introduction Welcome Thank you for choosing the Linksys Wireless-G Media Storage Link Router with SpeedBooster. The Router will allow you to network wirelessly better than ever, sharing Internet access, files and fun, easily and securely. How does the Router do all of this? A router is a device that allows access to an Internet connection over a network.
Wireless-G Media Storage Link Router with SpeedBooster Linksys recommends using the Setup CD-ROM for first-time installation of the Router. If you do not wish to run the Setup Wizard on the Setup CD-ROM, then use the instructions in this Guide to help you connect the Router, set it up, and configure it to bridge your different networks. These instructions should be all you need to get the most out of the Wireless-G Media Storage Link Router with SpeedBooster.
Wireless-G Media Storage Link Router with SpeedBooster • Appendix E: Finding the MAC Address and IP Address for your Ethernet Adapter. This appendix describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC filtering and/or MAC address cloning feature of the Router. • Appendix F: Glossary This appendix gives a brief glossary of terms frequently used in networking. • Appendix G: Specifications This appendix provides the technical specifications for the Router.
Wireless-G Media Storage Link Router with SpeedBooster Chapter 2: Planning Your Wireless Network Network Topology A wireless local area network (WLAN) is exactly like a regular local area network (LAN), except that each computer in the WLAN uses a wireless device to connect to the network. Computers in a WLAN share the same frequency channel and SSID, which is an identification name shared by the wireless devices belonging to the same wireless network.
Wireless-G Media Storage Link Router with SpeedBooster Notebook Adapters for your laptop computers, PCI Adapters for your desktop PCs, and USB Adapters when you want to enjoy USB connectivity. The Router will also communicate with the Wireless PrintServer and Wireless Ethernet Bridges. When you wish to connect your wireless network with your wired network, you can use the Router’s four Ethernet LAN ports.
Wireless-G Media Storage Link Router with SpeedBooster Chapter 3: Getting to Know the Wireless-G Media Storage Link Router The Back Panel The Router's ports, where the cables are connected, are located on the back panel. Figure 3-1: The Router’s Back Panel USB The USB port is where you will connect a USB flash disk or hard drive. You can attach a disk containing media files, so you can stream music, video, or pictures to a media adapter without using a computer.
Wireless-G Media Storage Link Router with SpeedBooster The Front Panel The Router’s SecureEasySetup button and LEDs are located on the front panel. Figure 3-2: The Router’s Front Panel SecureEasySetupOrange/White. SecureEasySetup configures the Router with a wireless network name (also called an SSID) and wireless security settings using a method called WPA-Personal. The Router’s SecureEasySetup button lights up and will stay orange when the Router is powered on.
Wireless-G Media Storage Link Router with SpeedBooster Chapter 4: Connecting the Wireless-G Media Storage Link Router Instructions for Connecting the Router 1. Power down your network devices. 2. Locate an optimum location for the Router. The best place for the Router is usually at the center of your wireless network, with line of sight to all of your mobile stations. 3. Fix the direction of the antenna. Try to place the Router in a position that will best cover your wireless network.
Wireless-G Media Storage Link Router with SpeedBooster 5. Connect a standard Ethernet network cable to the Router’s Internet port. Then, connect the other end of the Ethernet cable to your cable or DSL modem. Figure 4-2: Connect the Broadband Modem 6. Connect your network PCs or Ethernet devices to the Router’s numbered ports using standard Ethernet network cabling.
Wireless-G Media Storage Link Router with SpeedBooster 7. Connect the AC power adapter to the Router's Power port and the other end into an electrical outlet. Only use the power adapter supplied with the Router. Use of a different adapter may result in product damage. IMPORTANT: Make sure you use the power adapter that is supplied with the Router. Use of a different power adapter could damage the Router. Figure 4-4: Connect the Power Proceed to the following section, “Placement Options.
Wireless-G Media Storage Link Router with SpeedBooster 2. Drill two holes into the wall. Make sure adjacent holes are 2.36 inches (60 mm) apart. 3. Insert a screw into each hole, and leave 0.2 inches (5 mm) of its head exposed. 4. Maneuver the Router so the wall-mount slots line up with the two screws. 5. Place the wall-mount slots over the screws and slide the Router down until the screws fit snugly into the wallmount slots. 2.
Wireless-G Media Storage Link Router with SpeedBooster Chapter 5: Configuring the Wireless-G Media Storage Link Router Overview Linksys recommends using the Setup CD-ROM for first-time installation of the Router. If you do not wish to run the Setup Wizard on the Setup CD-ROM, then you can use the Web-based Utility to configure the Router. For advanced users, you may configure the Router’s advanced settings through the Web-based Utility.
Wireless-G Media Storage Link Router with SpeedBooster The Setup Tab - Basic Setup The first screen that appears displays the Setup tab. This allows you to change the Router's general settings. After you have made your changes, click the Save Settings button to apply your changes, or click the Cancel Changes button to cancel your changes. Internet Setup The Internet Setup section configures the Router to your Internet connection. Most of this information can be obtained through your ISP.
Wireless-G Media Storage Link Router with SpeedBooster • PPPoE. Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do, you will have to enable PPPoE. User Name and Password. Enter the User Name and Password provided by your ISP. Connect on Demand: Max Idle Time.
Wireless-G Media Storage Link Router with SpeedBooster • L2TP. If you are using an L2TP (Layer 2 Tunneling Protocol) connection, then select L2TP. User Name and Password. Enter the User Name and Password provided by your ISP. L2TP Server. Enter the IP address of the L2TP server you are using; this should be provided by your ISP. Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time).
Wireless-G Media Storage Link Router with SpeedBooster Optional Settings Some of these settings may be required by your ISP. Verify with your ISP before making any changes. Router Name. In this field, you can type a name of up to 39 characters to represent the Router. Host Name/Domain Name. These fields allow you to supply a host and domain name for the Router. Some ISPs, usually cable ISPs, require these names as identification.
Wireless-G Media Storage Link Router with SpeedBooster Maximum Number of DHCP Users. Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. This number cannot be greater than 253. The default is 50. Client Lease Time. The Client Lease Time is the amount of time a network user will be allowed connection to the Router with their current dynamic IP address. Enter the amount of time, in minutes, that the user will be “leased” this dynamic IP address.
Wireless-G Media Storage Link Router with SpeedBooster The Setup Tab - DDNS The Router offers a Dynamic Domain Name System (DDNS) feature. DDNS lets you assign a fixed host and domain name to a dynamic Internet IP address. It is useful when you are hosting your own website, FTP server, or other server behind the Router. Before you can use this feature, you need to sign up for DDNS service with a DDNS service provider, www.dyndns.org or www.TZO.com. DDNS DDNS Service.
Wireless-G Media Storage Link Router with SpeedBooster The Setup Tab - MAC Address Clone A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router with the MAC Address Clone feature. MAC Clone Enable/Disable.
Wireless-G Media Storage Link Router with SpeedBooster The Setup Tab - Advanced Routing This tab is used to set up the Router’s advanced functions. Operating Mode allows you to select the type(s) of advanced functions you use. Dynamic Routing will automatically adjust how packets travel on your network. Static Routing sets up a fixed route to another network destination. Advanced Routing Operating Mode Select the mode in which this Router will function.
Wireless-G Media Storage Link Router with SpeedBooster Default Gateway. This is the IP address of the gateway device that allows for contact between the Router and the remote network or host. Interface. This interface tells you whether the Destination IP Address is on the LAN & Wireless (Ethernet and wireless networks), the WAN (Internet), or Loopback (a dummy network in which one PC acts like a network— necessary for certain software programs).
Wireless-G Media Storage Link Router with SpeedBooster The Wireless Tab - Basic Wireless Settings The basic settings for wireless networking are set on this screen. Wireless Network Wireless Network Mode. From this drop-down menu, you can select the wireless standards running on your network. If you have both 802.11g and 802.11b devices in your network, keep the default setting, Mixed. If you have only 802.11g devices, select G-Only. If you have only 802.11b devices, select B-Only.
Wireless-G Media Storage Link Router with SpeedBooster A new screen will be displayed while the Router is waiting for you to push the SecureEasySetup button on your wireless client. NOTE: You can only add one SecureEasySetup device at a time. For additional devices, click the SecureEasySetup button on the Basic Wireless Settings screen and repeat the process. When the SecureEasySetup process is complete, the Basic Wireless Settings screen will appear, and the Status information will be updated.
Wireless-G Media Storage Link Router with SpeedBooster The Wireless Tab - Wireless Security The Wireless Security settings configure the security of your wireless network. There are four wireless security mode options supported by the Router: WPA Personal, WPA Enterprise, WPA2 Personal, WPA2 Enterprise, RADIUS, and WEP. (WEP stands for Wired Equivalent Privacy, WPA stands for Wi-Fi Protected Access, which is a security standard stronger than WEP encryption. WPA2 is stronger than WPA.
Wireless-G Media Storage Link Router with SpeedBooster WPA2 Personal. WPA2 gives you two encryption methods, TKIP and AES, with dynamic encryption keys. Select the type of algorithm, AES, or TKIP + AES. Enter a WPA Shared Key of 8-63 characters. Then enter a Group Key Renewal period, which instructs the Router how often it should change the encryption keys. After you have made your changes, click the Save Settings button to apply your changes, or click the Cancel Changes button to cancel your changes.
Wireless-G Media Storage Link Router with SpeedBooster RADIUS. This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the Router.) First, enter the RADIUS server’s IP Address and port number, along with a key shared between the Router and the server. Then, select a Default Transmit Key (choose which Key to use), and a level of WEP encryption, 64 bits 10 hex digits or 128 bits 26 hex digits.
Wireless-G Media Storage Link Router with SpeedBooster The Wireless Tab - Wireless MAC Filter Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius. Wireless MAC Filter Wireless MAC Filter. To filter wireless users by MAC Address, either permitting or blocking access, click Enable. If you do not wish to filter users by MAC Address, select Disable. Prevent. Clicking this button will block wireless access by MAC Address.
Wireless-G Media Storage Link Router with SpeedBooster The Wireless Tab - Advanced Wireless Settings This tab is used to set up the Router’s advanced wireless functions. These settings should only be adjusted by an expert administrator as incorrect settings can reduce wireless performance. Advanced Wireless Authentication Type. The default is set to Auto, which allows either Open System or Shared Key authentication to be used.
Wireless-G Media Storage Link Router with SpeedBooster sends the next DTIM with a DTIM Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast messages. The default value is 1. Fragmentation Threshold. This value specifies the maximum size for a packet before data is fragmented into multiple packets. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold.
Wireless-G Media Storage Link Router with SpeedBooster The Security Tab - Firewall Use this screen to enable or disable the Router’s firewall and various filters. Firewall Firewall Protection. This feature employs Stateful Packet Inspection (SPI) for a more detailed review of data packets entering your network environment. This feature is enabled by default. Select Disabled to disable this feature. Block WAN Requests Figure 5-30: Security Tab - Firewall Block Anonymous Requests.
Wireless-G Media Storage Link Router with SpeedBooster The Security Tab - VPN Passthrough Use the settings on this tab to allow VPN tunnels using IPSec, PPTP, or L2TP protocols to pass through the Router’s firewall. VPN Passthrough IPSec Passthrough. Internet Protocol Security (IPSec) is a suite of protocols used to implement secure exchange of packets at the IP layer. To allow IPSec tunnels to pass through the Router, click Enable. IPSec Passthrough is enabled by default.
Wireless-G Media Storage Link Router with SpeedBooster The Storage Tab - Disk You can attach a USB flash drive or hard disk to the Router. The Disk screen describes the disk currently attached to the Router. Using this screen, you can format a blank disk, safely remove a disk, or erase a disk. Disk Management Disk Detail If a blank disk is attached to the Router, the Disk, Make and Model, and Physical Size columns describe the disk. Figure 5-32: Storage Tab - Disk Claim.
Wireless-G Media Storage Link Router with SpeedBooster The Storage Tab - Share Shares control access to the partition(s) of the disk attached to the Router. The Share screen describes the current shares. Using this screen, you can create new shares, modify share properties, or delete shares. Share Management Shares The Share Name, Partition, and Total Space columns describe the shares. Figure 5-35: Storage Tab - Share Properties - Modify. Click the Modify button to change the properties of a share.
Wireless-G Media Storage Link Router with SpeedBooster The Storage Tab - Administration The Administration screen allows you to manage the users and groups of users that can access the shares. Basic Machine Name. Enter a name for the Router. Punctuation and other special characters (e.g., * / | \) cannot be used in the name. Workgroup Name. Enter the Workgroup Name of your networked computers. Machine Description.
Wireless-G Media Storage Link Router with SpeedBooster Properties - Modify. Click the Modify button to change the user membership of a group. On the Group Properties screen, users who are not members are listed in the Other Users column, and users who are members are listed in the Users in Group column. To add a user to the group, select the user, and click the >> Join Group button. To remove a user from the group, select the user, and click the << Remove button.
Wireless-G Media Storage Link Router with SpeedBooster The Storage Tab - Media Server The Router has a built-in media server, so it can stream music, pictures, or video from the USB hard disk to a UPnP-compatible media adapter. The Media Server screen lets you select shares to scan for content. UPnP Media Server Setup Server Name. The name of the Router is displayed here. UPnP Media Server. To use the Router’s media server function, select Enable. Otherwise, select Disable.
Wireless-G Media Storage Link Router with SpeedBooster The Access Restrictions Tab - Internet Access The Internet Access screen allows you to block or allow specific kinds of Internet usage and traffic, such as Internet access, designated services, websites, and inbound traffic during specific days and times. Internet Access Internet Access Policy. Access can be managed by a policy. Use the settings on this screen to establish an access policy (after the Save Settings button is clicked).
Wireless-G Media Storage Link Router with SpeedBooster 4. Click the Edit List of PCs button to select which PCs will be affected by the policy. The List of PCs screen will appear. You can select a PC by MAC Address or IP Address. You can also enter a range of IP Addresses if you want this policy to affect a group of PCs. After making your changes, click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. Then click the Close button. 5.
Wireless-G Media Storage Link Router with SpeedBooster The Applications and Gaming Tab - Port Range Forward The Applications and Gaming Tab allows you to set up public services on your network, such as web servers, ftp servers, e-mail servers, or other specialized Internet applications. (Specialized Internet applications are any applications that use Internet access to perform functions such as videoconferencing or online gaming. Some Internet applications may not require any forwarding.
Wireless-G Media Storage Link Router with SpeedBooster The Applications & Gaming Tab - Port Triggering The Port Triggering screen allows the Router to watch outgoing data for specific port numbers. The IP address of the computer that sends the matching data is remembered by the Router, so that when the requested data returns through the Router, the data is pulled back to the proper computer by way of IP address and port mapping rules. Port Triggering Application. Enter the application name of the trigger.
Wireless-G Media Storage Link Router with SpeedBooster The Applications and Gaming Tab - DMZ The DMZ feature allows one network user to be exposed to the Internet for use of a special-purpose service such as Internet gaming or videoconferencing. DMZ hosting forwards all the ports at the same time to one PC. The Port Range Forward feature is more secure because it only opens the ports you want to have opened, while DMZ hosting opens all the ports of one computer, exposing the computer to the Internet.
Wireless-G Media Storage Link Router with SpeedBooster The Applications and Gaming Tab - QoS Quality of Service (QoS) ensures better service to high-priority types of network traffic, which may involve demanding, real-time applications, such as videoconferencing. There are three types of Wired QoS available, Device Priority, Application Priority, and Ethernet Port Priority. You can also configure Wireless QoS on this page. Wired QoS Enable/Disable.
Wireless-G Media Storage Link Router with SpeedBooster Optimize Gaming Applications. Click this checkbox if you want the Router to automatically assign higher priority to common game application ports. Application Name. Enter the name of the application. Priority. For each port, select its priority level from the drop-down menu. Specific Port #. Enter the respective port number in the Specific Port# field. Wireless QoS The Router features Wi-Fi Multimedia (WMM™) Support.
Wireless-G Media Storage Link Router with SpeedBooster The Administration Tab - Management This section of the Administration tab allows the network’s administrator to manage specific Router functions for access and security. Router Password Local Router Access Router Password and Re-enter to confirm. You can change the Router’s password from here. Enter a new Router password and then type it again in the Re-enter to confirm field to confirm. Web Access Access Server.
Wireless-G Media Storage Link Router with SpeedBooster The Administration Tab - Log The Router can keep logs of all traffic for your Internet connection. Log To disable the Log function, keep the default setting, Disable. To monitor traffic between the network and the Internet, select Enable. When you wish to view the logs, click Incoming Log or Outgoing Log, depending on which you wish to view.
Wireless-G Media Storage Link Router with SpeedBooster The Administration Tab - Diagnostics The diagnostic tests (Ping and Traceroute) allow you to check the connections of your network components. Ping Test Ping Parameters Ping. The Ping test will check the status of a connection. Click the Ping button to open the Ping Test screen. Enter the address of the PC whose connection you wish to test and how many times you wish to test it. Then, click the Ping button.
Wireless-G Media Storage Link Router with SpeedBooster The Administration Tab - Factory Defaults You can reset the Router to its factory default settings using this screen. Factory Defaults Restore Factory Defaults. Click the Yes button to reset all configuration settings to their default values, and then click the Save Settings button. Any settings you have saved will be lost when the default settings are restored. This feature is disabled by default.
Wireless-G Media Storage Link Router with SpeedBooster The Status Tab - Router The Router screen on the Status Tab displays the Router’s current status. Router Information Firmware Version. This is the Router’s current firmware. Current Time. This shows the time, as you set on the Setup Tab. MAC Address. This is the Router’s MAC Address, as seen by your ISP. Router Name. This is the specific name for the Router, which you set on the Setup Tab. Host Name.
Wireless-G Media Storage Link Router with SpeedBooster The Status Tab - Local Network The Local Network screen on the Status Tab displays the status of your network. Local Network MAC Address. This is the Router’s MAC Address, as seen on your local, Ethernet network. IP Address. This shows the Router’s IP Address, as it appears on your local, Ethernet network. Subnet Mask. When the Router is using a Subnet Mask, it is shown here. DHCP Server.
Wireless-G Media Storage Link Router with SpeedBooster The Status Tab - Wireless The Wireless screen on the Status Tab displays the status of your wireless network. Wireless MAC Address. This is the Router’s MAC Address, as seen on your local, wireless network. Mode. As selected from the Wireless tab, this will display the wireless mode (Mixed, G-Only, or Disabled) used by the network. SSID. As entered on the Wireless tab, this will display the wireless network name or SSID.
Wireless-G Media Storage Link Router with SpeedBooster Appendix A: Troubleshooting This appendix consists of two parts: “Common Problems and Solutions” and “Frequently Asked Questions.” Provided are possible solutions to problems that may occur during the installation and operation of the Router. Read the descriptions below to help you solve your problems. If you can’t find an answer here, check the Linksys website at www.linksys.com. Common Problems and Solutions 1.
Wireless-G Media Storage Link Router with SpeedBooster • For Windows 2000: 1. Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections. 2. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option. 3. In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and click the Properties button. Select Use the following IP address option. 4.
Wireless-G Media Storage Link Router with SpeedBooster B Open a command prompt. For Windows 98SE and Me: • Click Start and Run. In the Open field, type command. Press the Enter key or click the OK button. For Windows 2000 and XP: • Click Start and Run. In the Open field, type cmd. Press the Enter key or click the OK button. In the command prompt, type ping 192.168.1.1 and press the Enter key. • If you get a reply, the computer is communicating with the Router.
Wireless-G Media Storage Link Router with SpeedBooster 5. I am not able to access the Setup page of the Router’s web-based utility. • Refer to “Problem #3, I want to test my Internet connection” to verify that your computer is properly connected to the Router. • Refer to “Appendix E: Finding the MAC Address and IP address for Your Ethernet Adapter” to verify that your computer has an IP Address, Subnet Mask, Gateway, and DNS.
Wireless-G Media Storage Link Router with SpeedBooster 7. I need to set up online game hosting or use other Internet applications. If you want to play online games or use Internet applications, most will work without doing any port forwarding or DMZ hosting. There may be cases when you want to host an online game or Internet application. This would require you to set up the Router to deliver incoming packets or data to a specific computer. This also applies to the Internet applications you are using.
Wireless-G Media Storage Link Router with SpeedBooster Follow these steps to set DMZ hosting: 1. Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router. Go to the Applications & Gaming => Port Range Forward tab. 2. Disable or remove the entries you have entered for forwarding. Keep this information in case you want to use it at a later time. 3. Go to the Applications & Gaming => DMZ tab. 4. Select Enable next to DMZ.
Wireless-G Media Storage Link Router with SpeedBooster 11. To start over, I need to set the Router to factory default. Hold the Reset button for 10 seconds and then release it. This will return the password, forwarding, and other settings on the Router to the factory default settings. In other words, the Router will revert to its original factory configuration. 12. I need to upgrade the firmware.
Wireless-G Media Storage Link Router with SpeedBooster 15. I can’t access my e-mail, web or I am getting corrupted data from the Internet. The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500. For most DSL users, it is strongly recommended to use MTU 1492. • If you are having some difficulties, perform the following steps: 1. To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the Router. 2.
Wireless-G Media Storage Link Router with SpeedBooster 18. I cannot write to the USB disk attached to the Router. Make sure your USB disk is formatted with the FAT32 file system. The Router cannot write to a disk that is formatted with the NTFS file system. 19. I do not see the Router in my Network Neighborhood. Make sure the Router uses the same Workgroup Group as the rest of your network. Access the Router’s Webbased Utility. Click the Storage tab. Then click the Administration tab.
Wireless-G Media Storage Link Router with SpeedBooster Where is my SecureEasySetup button? On the Router, the SecureEasySetup button is located on the front panel. The button should be lighted either orange or white. For other SecureEasySetup devices, refer to each wireless device's documentation to locate the button on that device. I have devices that support WPA-Personal security, but do not have SecureEasySetup. Can I still use SecureEasySetup? Yes.
Wireless-G Media Storage Link Router with SpeedBooster Does the Router support any operating system other than Windows 98SE, Windows Millennium, Windows 2000, or Windows XP? Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of any non-Windows operating systems. Does the Router support ICQ send file? Yes, with the following fix: click ICQ menu -> preference -> connections tab->, and check I am behind a firewall or proxy.
Wireless-G Media Storage Link Router with SpeedBooster If all else fails in the installation, what can I do? Reset the Router by holding down the reset button until the Power LED fully turns on and off. Reset your cable or DSL modem by powering the unit off and then on. Obtain and flash the latest firmware release that is readily available on the Linksys website, www.linksys.com. How will I be notified of new Router firmware upgrades? All Linksys firmware upgrades are posted on the Linksys website at www.
Wireless-G Media Storage Link Router with SpeedBooster Is the Router cross-platform compatible? Any platform that supports Ethernet and TCP/IP is compatible with the Router. How many ports can be simultaneously forwarded? Theoretically, the Router can establish 520 sessions at the same time, but you can only forward 10 ranges of ports.
Wireless-G Media Storage Link Router with SpeedBooster What IEEE 802.11b features are supported? The product supports the following IEEE 802.11b functions: • CSMA/CA plus Acknowledge protocol • Multi-Channel Roaming • Automatic Rate Selection • RTS/CTS feature • Fragmentation • Power Management What is ad-hoc mode? When a wireless network is set to ad-hoc mode, the wireless-equipped computers are configured to communicate directly with each other.
Wireless-G Media Storage Link Router with SpeedBooster What is ISM band? The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being made available worldwide. This presents a truly revolutionary opportunity to place convenient high-speed wireless capabilities in the hands of users around the globe.
Wireless-G Media Storage Link Router with SpeedBooster How do I resolve issues with signal loss? There is no way to know the exact range of your wireless network without testing. Every obstacle placed between the Router and a wireless PC will create signal loss. Lead glass, metal, concrete floors, water and walls will inhibit the signal and reduce range. Start with the Router and your wireless PC in the same room and move it away in small increments to determine the maximum range in your environment.
Wireless-G Media Storage Link Router with SpeedBooster Appendix B: Wireless Security Linksys wants to make wireless networking as safe and easy for you as possible. The current generation of Linksys products provide several network security features, but they require specific action on your part for implementation. So, keep the following in mind whenever you are setting up or using your wireless network.
Wireless-G Media Storage Link Router with SpeedBooster SSID. There are several things to keep in mind about the SSID: 1. Disable Broadcast 2. Make it unique 3. Change it often Most wireless networking devices will give you the option of broadcasting the SSID. While this option may be more convenient, it allows anyone to log into your wireless network. This includes hackers. So, don’t broadcast the SSID. Wireless networking products come with a default SSID set by the factory.
Wireless-G Media Storage Link Router with SpeedBooster WPA Enterprise and WPA2 Enterprise use a RADIUS (Remote Authentication Dial-In User Service) server for authentication. RADIUS uses a RADIUS server and WEP encryption. WPA Personal. Select the type of algorithm, TKIP or AES, and enter a password in the Passphrase field of 8-63 characters. Enter a Group Key Renewal period time between 0 and 99,999 seconds, which instructs the Router or other device how often it should change the encryption keys.
Wireless-G Media Storage Link Router with SpeedBooster Appendix C: Upgrading Firmware The Router's firmware is upgraded through the Web-based Utility's Administration tab. Follow these instructions: 1. Download the firmware from Linksys's website at www.linksys.com. 2. Extract the firmware file on your computer. 3. Open the Router’s Web-based Utility, and click the Administration tab. 4. Click Firmware Upgrade, and the Upgrade Firmware screen will appear. 5.
Wireless-G Media Storage Link Router with SpeedBooster Appendix D: Windows Help Almost Linksys wireless products require Microsoft Windows. Windows is the most used operating system in the world and comes with many features that help make networking easier. These features can be accessed through Windows Help and are described in this appendix. TCP/IP Before a computer can communicate with the Router, TCP/IP must be enabled.
Wireless-G Media Storage Link Router with SpeedBooster Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer’s Ethernet adapter. This IP address is used for the Router’s filtering, forwarding, and/or DMZ features.
Wireless-G Media Storage Link Router with SpeedBooster The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering. NOTE: The MAC address is also called the Physical Address. The example in Figure E-3 shows the Ethernet adapter’s IP address as 192.168.1.100. Your computer may show something different. For the Router’s Web-based Utility For wireless MAC filtering, enter the 12-digit MAC address in this format, XXXXXXXXXXXX, WITHOUT the hyphens. See Figure E-4.
Wireless-G Media Storage Link Router with SpeedBooster Appendix F: Glossary This glossary contains some basic networking terms you may come across when using this product. For more advanced terms, see the complete Linksys glossary at http://www.linksys.com/glossary. Access Point - A device that allows wireless-equipped computers and other devices to communicate with a wired network. Also used to expand the range of a wireless network.
Wireless-G Media Storage Link Router with SpeedBooster DMZ (Demilitarized Zone) - Removes the Router's firewall protection from one PC, allowing it to be “seen” from the Internet. DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP addresses. Domain - A specific name for a network of computers. Download - To receive a file transmitted over a network. DSL (Digital Subscriber Line) - An always-on broadband connection over traditional phone lines.
Wireless-G Media Storage Link Router with SpeedBooster IP Address - The address used to identify a computer or device on a network. IPCONFIG - A Windows 2000 and XP utility that displays the IP address for a particular networking device. IPSec (Internet Protocol Security) - A VPN protocol used to implement secure exchange of packets at the IP layer. ISP (Internet Service Provider) - A company that provides access to the Internet. LAN - The computers and networking products that make up your local network.
Wireless-G Media Storage Link Router with SpeedBooster RJ-45 (Registered Jack-45) - An Ethernet connector that holds up to eight wires. Roaming - The ability to take a wireless device from one access point's range to another without losing the connection. Router - A networking device that connects multiple networks together. Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services.
Wireless-G Media Storage Link Router with SpeedBooster TKIP (Temporal Key Integrity Protocol) - a wireless encryption protocol that provides dynamic encryption keys for each packet transmitted. Topology - The physical layout of a network. TX Rate - Transmission Rate. Upgrade - To replace existing software or firmware with a newer version. Upload - To transmit a file over a network. URL (Uniform Resource Locator) - The address of a file located on the Internet.
Wireless-G Media Storage Link Router with SpeedBooster Appendix G: Specifications Model WRTSL54G Standards IEEE 802.11b, 802.11g, 802.3, 802.3u, USB 1.0, USB 2.0 Ports Ethernet (1-4), Internet, Power, USB Buttons SecureEasySetup, Reset Cabling Type CAT 5, USB 2.
Wireless-G Media Storage Link Router with SpeedBooster Operating Temp. 0º~40ºC (32º~104ºF) Storage Temp.
Wireless-G Media Storage Link Router with SpeedBooster Appendix H: Warranty Information LIMITED WARRANTY Linksys warrants to You that, for a period of three years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use. Your exclusive remedy and Linksys' entire liability under this warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.
Wireless-G Media Storage Link Router with SpeedBooster Appendix I: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Wireless-G Media Storage Link Router with SpeedBooster User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products.
Wireless-G Media Storage Link Router with SpeedBooster Appendix I: Regulatory Information 84
Wireless-G Media Storage Link Router with SpeedBooster Appendix I: Regulatory Information 85
Wireless-G Media Storage Link Router with SpeedBooster Appendix I: Regulatory Information 86
Dual-Band Wireless Access Point For more information, visit www.linksys.com.
Wireless-G Media Storage Link Router with SpeedBooster Appendix J: Contact Information Need to contact Linksys? Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com or ftp.linksys.
