User Manual

Chapter 2
Phone Menus
9
Wireless-G IP Phone
or No (right soft key) to cancel.
Main Menu > Settings > Clock
Use this option to display an analog clock face as a
screensaver on the handset’s display screen when it is in
standby mode.
Main Menu > Settings > Clock
When the handset is in the standby mode, press the
select button to see the Main Menu options. Press
the left or right arrow to select Settings, if it is not on-
screen.
Press the select button to display the Settings menu.
Press the up or down arrow to highlight Clock and
press the select button.
Main Menu > Settings > Clock > Analog Clock Display Enabled
The screensaver will no longer display when you press any
soft key. Adjust the amount of time the screensaver is on
the handset screen (1 to 30 seconds) under the Main Menu
> Settings > Screen Dimmer options.
Main Menu > Settings > Date/Time
Use this option to customize the date and time settings for
the handset. You can change the hour, minute and time
format (12 or 24 hour). You can also change the month,
day, year and the way this information displays.
Main Menu > Settings > Date/Time
1.
2.
When the handset is in the standby mode, press the
select button to see the Main Menu options. Press
the left or right arrow to select Settings, if it is not on-
screen.
Press the select button to display the Settings menu.
Press the up or down arrow to highlight Date/Time
and press the select button.
To change the time and time format:
There are two tabs available, Time and Date. Press the left
arrow to highlight Time, if it is not already highlighted.
Main Menu > Settings > Date/Time > Time
To change the hour, press the up or down arrow
to highlight the Hour number field. Enter a number
from the keypad, or press the left or right arrow to
select the current hour based on the current time
format. Press OK (the select button) to confirm
your choice.
To change the minutes, press the up or down arrow
to select the Min (minutes) number field. Enter a
number from the keypad, or press the left or right
arrow to highlight the minutes (00-59). Press OK
(the select button) to confirm your choice.
Press the up or down arrow to select Time Format.
Press the up or down arrow highlight a 24 hour
format (0=midnight) or 12 hour format. Press the
select button to confirm your choice.
When you are done, press Back to exit and return
to the Settings menu.
To change the date and date format:
Press the right arrow to highlight Date, if it is not already
highlighted.
To change the month, press the down arrow to
highlight the Month number field. Enter a number
from the keypad, or press the left or right arrow to
select the month. Press OK (the select button) to
confirm your choice.
To change the day, press the up or down arrow to
highlight the Day number field. Enter a number
from the keypad, or press the left or right arrow
to select the day. Press OK (the select button) to
confirm your choice.
1.
2.
a.
b.
c.
d.
a.
b.