User Manual
Table Of Contents
- Copyright and Trademarks
- How to Use this Guide
- Chapter 1: Introduction
- Chapter 2: Getting to Know the Wireless-G IP Phone
- Chapter 3: Installing and Using the Wireless-G IP Phone
- Chapter 4: Configuring the Wireless-G IP Phone
- Chapter 5: Using the Web-Based Utility
- Appendix A: Troubleshooting
- Appendix B: Glossary
- Appendix C: Specifications
- Appendix D: Warranty Information
- Appendix E: Regulatory Information
- Appendix F: Contact Information
Wireless-G IP Phone
31
Chapter 4: Configuring the Wireless-G IP Phone
Settings
Display Settings
The Display Settings menu allows you to customize the IP Phone’s display. Refer to the table below for a list of options available in the Display Settings menu.
Keypad
The Keypad menu allows you to customize the IP Phone’s keypad settings. Refer to the table below for a list of options available in the Keypad menu.
Option Description
Wallpaper Change the picture displayed on the home screen. Default Wallpaper is wallpaper that came with
the Phone. Personal Wallpaper is wallpaper you uploaded to the Phone using the web-based utility.
Greeting Change the message displayed on the home screen.
LCD Off Time Change the amount of time it takes for the IP Phone to turn off its LCD when the phone is not in use.
LCD Brightness Change the brightness of the LCD screen.
Config. Tip Enable or disable configuration tips.
Option Description
Keypad Lock Lock the IP Phone’s keypad. To unlock the keypad, press the Left Soft Key then press the * (Star)
key.
Key Tone Enable or disable the IP Phone’s key tones.
Key Backlight Enable or disable the IP Phone’s key backlight.