User's Manual Part 2

23
Chapter 7: Using the Wireless-G Ethernet Bridge Web-based Utility
Setup
Wireless-G Ethernet Bridge
TTLS
TTLS is a mutual authentication method that uses digital certificates. Select TTLS from the EAP Type drop-
down menu. Enter the Login name of your wireless network in the
User ID field and the password in the
Password field. Enter the Root Certificate in the field or click the Browse button to browse for it, then upload
it.
• EAP Type - The authentication method that your network uses. Select TTLS from the drop-down menu.
• User ID -Your User ID is the Login name of your wireless network. Enter the Login name of your wireless
network in the
User ID field.
• Password - This is the password used for your wireless network. Enter the password in the
Password field.
• Root Certificate - Enter the root certificate you have installed to authenticate you on your w ireless network
or
click the Browse button to brow se for it. Click the Upload button to upload the certificate.
Click the Apply button to save your changes. If your page doesn’t automatically refresh itself, then click the
Refresh button of your w eb browser. Click the View Log button to view a log.
To save your changes, click the Apply button. Click the Cancel button to cancel your changes. Click the Help
button for additional on-screen information.
Figure 7-10: RADIUS-TTLS