User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 3: Planning Your Wireless Network
- Chapter 4: Connecting the Wireless Ethernet Bridge
- Chapter 5: Setting Up the Wireless Ethernet Bridge
- Chapter 6: Using the Wireless Ethernet Bridge Web-based Utility
- Appendix A: Troubleshooting
- Appendix B: Glossary
- Appendix C: Specifications
- Appendix D: Warranty Information
- Appendix E: Contact Information
Wireless Ethernet Bridge
The Help screen offers links to all of the help information for the Web-based
Utility’s screens and the Bridge’s online technical support resources. All infor-
mation is read-only.
• Linksys Website - Click the Linksys Website link to visit Linksys’s web-
site, www.linksys.com (available if you have an active Internet connection).
27
Instant Wireless
®
Series
LAN Settings
• IP Address - The Bridge’s IP Address is displayed here.
• Subnet Mask - The Bridge’s Subnet Mask is displayed here.
• Gateway - The Gateway address for the Bridge is displayed here.
LAN Statistics
• Ethernet TX - The number of packets transmitted to the Ethernet network
is displayed here.
• Ethernet RX - The number of packets received from the Ethernet network
is displayed here.
• Wireless TX - The number of packets transmitted to the wireless network
is displayed here.
• Wireless RX - The number of packets received from the wireless network
is displayed here.
Wireless Settings
• SSID - The Bridge’s SSID is displayed here.
• Network Type - The Bridge’s mode is displayed here.
• Channel - The Bridge’s channel setting is displayed here.
• WEP - The status of the Bridge’s WEP encryption is displayed here.
Click the Refresh button to obtain the most up-to-date settings and statistics.
Click the Help button for additional on-screen information.
26
Figure 6-8
Help










