User Manual

Chapter 4: Access Internet through Cable Modem
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
S
S
e
e
c
c
u
u
r
r
i
i
t
t
y
y
-
-
W
W
E
E
P
P
For this mode, the settings that you can adjust
including wireless encryption level, default key,
passphrase for keys, wireless wep key #1 to #4.
Wireless Encryption Level:
Select the WEP mode for the WEP key function. You
can choose 64-bit or 128-bit for your necessity. If
you choose Off, the Encryption Keys will not be
shown on this page. If selected, data is encrypted
using the key before being transmitted. For example,
if you set 128-bit in this field, then the receiving
station must be set to use 128 Bit Encryption, and
have the same Key value too. Otherwise, it will not
be able to decrypt the data.
Default Key:
Select one of network key (from 1 to 4) that you set
on the Key boxes as default one.
PassPhrase for Keys:
You can type in ASCII codes into this field. The
range is from 8 characters to 64 characters. For
ASCII characters, you can type in 63 characters
in this field. If you want to type in 64 characters,
only hexadecimal characters can be used.
Generate WEP Keys:
Click this button to generate the PassPhrase.
Wireless WEP Key #1 to #4:
Type the encryption key length and fill out WEP
keys. The system allows you to type in 4 kinds of the
WEP key. For 64-bit WEP mode, the number you
can type is that 5 characters or 10 hexadecimal digits.
As for 128-bit WEP mode, the number you can type
is that 13 characters or 26 hexadecimal digits.
After finished settings, click Save Settings for
activation for next time.
11