User's Guide
Table Of Contents
- User Guide Cover
- Chapter 1: Introduction
- Chapter 2: Getting to Know the Wireless-G CompactFlash Card
- Chapter 3: Setting Up the PDA
- Chapter 4: Installing the CompactFlash Card
- Chapter 5: Connecting to a Wireless Network
- Chapter 6: Configuring the Wireless-G CompactFlash Card with the Wireless Network Monitor
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: Upgrading Firmware
- Appendix D: Windows Help
- Appendix E: Glossary
- Appendix F: Specifications
- Appendix G: Warranty Information
- Appendix H: Regulatory Information
- Appendix I: Contact Information
27
Appendix C: Upgrading Firmware
Wireless-G CompactFlash Card
Appendix C: Upgrading Firmware
The Access Point's firmware is upgraded through the Web-Utility's Help tab. Follow these instructions:
1. Download the firmware from Linksys's website at www.linksys.com.
2. Click Upgrade Firmware from the Web-Utility's Help tab, and the Upgrade Firmware screen, shown in Figure
C-1, will appear.
3. Enter the location of the firmware's file or click the Browse button to find the file.
4. Then, click the Upgrade button to upgrade the firmware.
Figure C-1: Upgrade Firmware