User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Planning Your Wireless Network
- Chapter 3: Getting to Know the Wireless-G Bridge for Phone Adapters
- Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: Windows Help
- Appendix D: Glossary
- Appendix E: Specifications
- Appendix F: Warranty Information
- Appendix G: Regulatory Information
- Appendix H: Contact Information
27
Appendix E: Specifications
Wireless-G Bridge for Phone Adapters
Appendix E: Specifications
Model WBP54G
Standards IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g
Port One 5V/2A DC power input port
Cabling Type One combo-power/Ethernet cable attached to the device
with DC power jack and RJ-45 Ethernet connector
# of Antennas One internal PIFA antenna
Connector Type One combo-power/Ethernet cable attached to the device
with DC power jack and RJ-45 Ethernet connector
RF Pwr (EIRP) in dBm 13 ±1.5dBm (802.11g) / 17 ±1.5dBm (802.11b)
Antenna Gain in dBi 1 dBi
Security Features WPA2, WPA, WEP
WEP Key Bits 64, 128
Dimensions 2.01" x 3.62" x 1.14"
(51 mm x 92 mm x 29 mm)
Unit Weight 2.54 oz. (0.072 kg)
Power External, 5V DC, 2.0A (Not included, use the power
adapter shipped with Linksys phone adapter or IP
phone products)
Certifications FCC, CE, cUL, IC-03, Wi-Fi, WPA, WPA2