User's Manual

Wireless-G Access Point with Power Over Ethernet
List of Figures
Figure 3-1: Front Panel 6
Figure 3-2: Back Panel 7
Figure 4-1: Connect the Ethernet Network Cable 8
Figure 4-2: Connect the Power 8
Figure 4-3: The Access Point’s Stand Slots 9
Figure 4-4: The Access Point’s Wall-Mount Slots 9
Figure 5-1: Setup Wizard’s Welcome Screen 10
Figure 5-2: Connect the Network Cable to Your Switch or Router 11
Figure 5-3: Connect the Network Cable to the Access Point 11
Figure 5-4: Power on the Access Point 12
Figure 5-5: Check the Access Point’s Status 12
Figure 5-6: Select an Access Point 13
Figure 5-7: Login Screen 13
Figure 5-8: Configure Network Address Settings Screen 14
Figure 5-9: Wireless Settings Screen 15
Figure 5-10: Wireless Security Settings - WEP Screen 16
Figure 5-11: Wireless Security Settings - WPA-Personal Screen 17
Figure 5-12: Wireless Power Management Screen 17
Figure 5-13: Confirmation Screen 18
Figure 5-14: Congratulations Screen 18
Figure 6-1: Login Screen 21
Figure 6-2: Setup - Automatic Configuration - DHCP Screen 21
Figure 6-3: Setup - Static IP Address Screen 22
Figure 6-4: Wireless - Basic Wireless Settings Screen 23
Figure 6-5: Wireless - Wireless Security (WPA-Personal) Screen 25
Figure 6-6: Wireless Security - WPA-Enterprise Screen 26
Figure 6-7: Wireless Security - RADIUS Screen 27
Figure 6-8: Wireless Security - WEP Screen 28