User's Manual

13
Chapter 5: Setting Up the Wireless-G Access Point with Power Over Ethernet
Setup Wizard
Wireless-G Access Point with Power Over Ethernet
7. The Setup Wizard will run a search for the Access Point within your network and then display a list along with
the status information for the selected access point. If this is the only access point on your network, it will be
the only one displayed. If there are more than one displayed, select the Access Point by clicking on it. Then
click the Yes button to continue or No to exit the Setup Wizard.
8. You will be asked to sign onto the Access Point you have selected. Enter the default user name and password,
admin, in both fields. Then, click Enter. (This user name and password can be changed from the Web-based
Utility's Administration - Management tab.)
Figure 5-7: Login Screen
Figure 5-6: Select an Access Point