User's Manual

11
Chapter 5: Setting Up the Wireless-G Access Point with Power Over Ethernet
Setup Wizard
Wireless-G Access Point with Power Over Ethernet
3. Optimally, you should set up the Access Point using a PC on your wired network. Connect a network cable to
your network switch or router. Click the Next button to continue or Back to return to the previous screen.
4. The screen shows how the Access Point should be connected as you run the Setup Wizard. Connect the other
end of the network cable to the Access Point. Click the Next button to continue or Back to return to the
previous screen.
Figure 5-3: Connect the Network Cable to the
Access Point
Figure 5-2: Connect the Network Cable to Your Switch
or Router