Quick Start Manual

For the Virtual Circuit, enter the VPI and VCI settings.E.
Proceed to the appropriate instructions for your Encapsulation method. F.
Enter the following settings unless otherwise instructed by your ISP.
Encapsulation Settings by Country
Country Encapsulation Multiplexing VPI VCI
Australia PPPoE LLC 8 35
New Zealand PPPoA VC 0 100
UK PPPoA VC 0 38
RFC 2364 PPPoA or RFC 2516 PPPoE
Enter your User Name and 1.
Password.
2. Select Keep Alive if you always
want to be connected to your
ISP, or select Connect on
Demand if you are charged
for the time that you are
connected to your ISP.
Click3. Save Settings.
RFC 2364 PPPoA
RFC 2516 PPPoE