Quick Start Manual

F. Connect the power adapter to

the Gateway’s power port and

the electrical outlet.

Power on the computer that G.

you want to use to configure the

Gateway.

The Power, Wireless, and at least one of the numbered Ethernet (1, 2, 3, H.

or 4) LEDs should light up. If not, make sure the Gateway is powered on

and the cables are securely connected.

Connection is complete. Go to Step 2: Configuration.

Configuration 2

In step 2, configure the Gateway to access the Internet through your ADSL

Internet Service Provider (ISP). Use the setup information provided by your

ISP.

NOTE: You only need to congure the Gateway once.

A. Open your web browser. Enter

http://192.168.1.1 in the web

browser’s Address field. Press

Enter.

B. On the login screen, enter

admin in lowercase letters

in both the User name and

Password fields (admin is

the default user name and

password). Click OK.

The C. Basic Setup screen appears. Refer to the settings provided by your

ISP. Select the Encapsulation method your ISP has specified.

For the Multiplexing setting, select D. LLC or VC.

Conexão da alimentação

Access the Web-Based Utility