Manual
Table Of Contents
- User Guide
- Table of Contents
- List of Figures
- Chapter 1: Introduction
- Chapter 2: Planning your Network
- Chapter 3: Getting to Know the Wireless-G ADSL Gateway
- Chapter 4: Connecting the Wireless-G Broadband Gateway
- Chapter 5: Configuring the Gateway
- Appendix A: Troubleshooting
- Appendix B: Wireless Security
- Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
- Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter
- Appendix E: Upgrading Firmware
- Appendix F: Glossary
- Appendix G: Specifications
- Appendix H: Regulatory Information
- Appendix I: Warranty Information
- Appendix J: Contact Information
38
Chapter 5: Configuring the Gateway
The Administration Tab
Wireless-G ADSL Gateway
Reporting
The Reporting tab, shown in Figure 5-31, provides you with a log of all incoming and outgoing URLs or IP
addresses for your Internet connection. It also provides logs for VPN and firewall events.
Log
Log. To enable log reporting, click Enabled.
• Logviewer IP Address. Enter the IP Address to receive logs into the field.
Email Alerts
E-Mail Alerts. To enable E-Mail Alerts, click Enabled.
• Denial of Service Thresholds. Enter the thresholds of events you want to receive.
• SMTP Mail Server. Enter the IP Address of the SMTP server in the field.
• E-Mail Address for Alert Logs. Enter the e-mail address for alert logs in the field.
• Return E-Mail address. Enter the address for the return e-mail.
To view the logs, click the View Logs button.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Figure 5-31: Reporting