Instruction Manual

3-37
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 3 Managing Linksys IP Phones
System Administration
Interdigit Short Timer
The <Interdigit_Short_Timer> specifies the default maximum time (in seconds) allowed between dialed
digits, when at least one candidate digit sequence is complete as dialed (see the following discussion of
Dial_Plan parameters for an explanation of candidate digit sequences).
Dial Plans
The Dial_Plan parameters contain the actual dial plan scripts for each line n, where n is a number from
1 to 4.
System Administration
This section describes features and operations required for administering and maintaining the basic
function of the Linksys IP phone. It includes the following topics:
• Reboot and Restart, page 3-37
• Factory Reset, page 3-38
• Password Protection, page 3-38
• Managing the Time/Date, page 3-38
• Daylight Saving Time, page 3-38
• Using Star Codes to Activate/Deactivate Services, page 3-39
• Disabling Services, page 3-41
• Error and Log Reporting, page 3-42
Reboot and Restart
• Reboot cold boots the phone and restarts the phone’s DHCP client.
• Restart warm boots the phone, without restarting the phone’s DHCP client.
You must confirm the chosen option before continuing.
ParName
Interdigit_Short_Timer
Default
3
ParName
Dial_Plan[n] for Each Line n
Default
(*xx | [3469]11 | 0 | 00 | <:1408>[2-9]xxxxxx |
1[2-9]xx[2-9]xxxxxx | 011x. )