Instruction Manual
Table Of Contents
- Preface
- Introducing Linksys IP Phones
- Getting Started
- Managing Linksys IP Phones
- Using the 900 Series LCD Display
- Localization
- Changing the Display Background (SPA942/962)
- Using the SPA932 (Sidecar) with the SPA962
- Configuring the Web Service
- RSS Newsfeeds (SPA962)
- Call Appearances and Extensions
- Line Key LEDs
- Using Call Features
- Selecting the Audio I/O Device and Line
- Making Calls
- Answering and Ending Calls
- Hold and Resume
- Call Waiting
- Speed Dialing
- Three-Way Conferencing
- Attended Call Transfer
- Blind Call Transfer
- Call Back
- Message Waiting Indication (MWI)
- Accessing Voicemail
- Muting Calls
- Shared Call Appearances
- Personal Directory
- Caller and Called Name Matching
- Dialing Assistance
- Supplementary Services
- Call Logs
- Audio Volume Adjustment
- Managing Ring Tones
- Configuring a Dial Plan
- System Administration
- Troubleshooting FAQ
- SPA900 Series LCD Command Reference
- Entering Names and Numbers into the Directory
- Entering Directory Names, Numbers and Ring Default
- 2 Speed Dial
- 3 Call History
- 4 Ring Tone
- 5 Preferences
- 6 Call Forward
- 7 Time/Date
- 8 Voice Mail
- 9 Network
- 9.1 DCHP
- 9.2 Current IP Address
- 9.3 Host Name
- 9.4 Domain
- 9.5 Current NetMask
- 9.6 Current Gateway
- 9.7 Enable Web Server
- 9.8 Non DHCP IP Address
- 9.9 Non DHCP Subnet Mask
- 9.10 Non DHCP Default Route
- 9.11 Non DHCP DNS 1
- 9.12 Non DHCP DNS 2
- 9.13 Non DHCP NTP Server 1
- 9.14 Non DHCP NTP Server 2
- 9.15 Multicast Address
- 9.16 Enable VLAN
- 9.17 VLAN ID
- 9.18 CDP
- 10 Product Info
- 11 Status
- 12 Reboot
- 13 Restart
- 14 Factory Reset
- 15 Custom Reset
- 16 Set Password
- 17 Set LCD Contrast
- 18 CallPark Status
- 19 Language (SPA922, 942, and 962)
- 20 GUI Properties (SPA962)
- 21 Web Service (SPA962)
- Linksys IP Phone Field Reference
- Acronyms
- Glossary
A-1
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Appendix A Acronyms
A
Acronyms
A/D Analog To Digital Converter
ANC Anonymous Call
B2BUA Back to Back User Agent
BLF Busy Lamp Field
Bool Boolean Values. Specified as “yes” and “no”, or “1” and “0” in the profile
CA Certificate Authority
CAS CPE Alert Signal
CDR Call Detail Record
CID Caller ID
CIDCW Call Waiting Caller ID
CNG Comfort Noise Generation
CPC Calling Party Control
CPE Customer Premises Equipment
CWCID Call Waiting Caller ID
CWT Call Waiting Tone
D/A Digital to Analog Converter
dB decibel
dBm dB with respect to 1 milliwatt
DHCP Dynamic Host Configuration Protocol
DNS Domain Name Server
DRAM Dynamic Random Access Memory
DSL Digital Subscriber Loop
DSP Digital Signal Processor
DTAS Data Terminal Alert Signal (same as CAS)
DTMF Dual Tone Multiple Frequency
FQDN Fully Qualified Domain Name
FSK Frequency Shift Keying
FXS Foreign eXchange Station
GW Gateway
ITU International Telecommunication Union