Instruction Manual
Table Of Contents
- Preface
- Introducing Linksys IP Phones
- Getting Started
- Managing Linksys IP Phones
- Using the 900 Series LCD Display
- Localization
- Changing the Display Background (SPA942/962)
- Using the SPA932 (Sidecar) with the SPA962
- Configuring the Web Service
- RSS Newsfeeds (SPA962)
- Call Appearances and Extensions
- Line Key LEDs
- Using Call Features
- Selecting the Audio I/O Device and Line
- Making Calls
- Answering and Ending Calls
- Hold and Resume
- Call Waiting
- Speed Dialing
- Three-Way Conferencing
- Attended Call Transfer
- Blind Call Transfer
- Call Back
- Message Waiting Indication (MWI)
- Accessing Voicemail
- Muting Calls
- Shared Call Appearances
- Personal Directory
- Caller and Called Name Matching
- Dialing Assistance
- Supplementary Services
- Call Logs
- Audio Volume Adjustment
- Managing Ring Tones
- Configuring a Dial Plan
- System Administration
- Troubleshooting FAQ
- SPA900 Series LCD Command Reference
- Entering Names and Numbers into the Directory
- Entering Directory Names, Numbers and Ring Default
- 2 Speed Dial
- 3 Call History
- 4 Ring Tone
- 5 Preferences
- 6 Call Forward
- 7 Time/Date
- 8 Voice Mail
- 9 Network
- 9.1 DCHP
- 9.2 Current IP Address
- 9.3 Host Name
- 9.4 Domain
- 9.5 Current NetMask
- 9.6 Current Gateway
- 9.7 Enable Web Server
- 9.8 Non DHCP IP Address
- 9.9 Non DHCP Subnet Mask
- 9.10 Non DHCP Default Route
- 9.11 Non DHCP DNS 1
- 9.12 Non DHCP DNS 2
- 9.13 Non DHCP NTP Server 1
- 9.14 Non DHCP NTP Server 2
- 9.15 Multicast Address
- 9.16 Enable VLAN
- 9.17 VLAN ID
- 9.18 CDP
- 10 Product Info
- 11 Status
- 12 Reboot
- 13 Restart
- 14 Factory Reset
- 15 Custom Reset
- 16 Set Password
- 17 Set LCD Contrast
- 18 CallPark Status
- 19 Language (SPA922, 942, and 962)
- 20 GUI Properties (SPA962)
- 21 Web Service (SPA962)
- Linksys IP Phone Field Reference
- Acronyms
- Glossary
5-41
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Ext Tab
Proxy and Registration
Note Many of the following parameters do not apply to the SPA901.
MOH Server User ID or URL of the auto-answering streaming audio server. When only a user ID is
specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the
MOH Server is not specified.
Defaults to imusic when used with a SPA9000 IP PBX.
Message Waiting Indicates whether the Message Waiting Indicator on the phone is lit. This parameter is
toggled by a message from the SIP proxy to indicate if a message is waiting. You can
manually modify it to clear or set the flag in the Ext 1-6 tab.
Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is
stored in long-term memory and survives after reboot or power cycle.
Defaults to No.
Auth Page Specifies whether to authenticate the invite before auto answering a page.
Defaults to No.
Default Ring Type of ring heard. This corresponds to the Ring Tone on the Phone tab. Choose from No
Ring, 1 through 10, User 1, or User 2.
Defaults to 1.
Auth Page Realm Identifies the Realm part of the Auth that is accepted when the Auth Page parameter is set
to Yes. This parameter accepts alphanumeric characters.
Defaults to blank.
Conference Bridge URL This is the URL used to join into a conference call, generally in the form of the word
“conference” or
“user@IPaddress:port”.
Defaults to blank.
Auth Page Password Identifies the password used when the Auth Page parameter is set to Yes. This parameter
accepts alphanumeric characters.
Defaults to blank.
Mailbox ID Identifies the voicemail box number/ID for the phone.
Defaults to blank.
Voice Mail Server Identifies the SpecVM server for the phone, generally the IP address and port number of
the VM server.
State Agent Reserved feature.
CFWD Notify Serv Specifies whether to enable a SIP-B feature regarding the sending of a Notify to the phone
when a call is forwarded elsewhere.
Defaults to No.
CFWD Notifier Typically, this field is configured with the SIP proxy information.