Instruction Manual
Table Of Contents
- Preface
- Introducing Linksys IP Phones
- Getting Started
- Managing Linksys IP Phones
- Using the 900 Series LCD Display
- Localization
- Changing the Display Background (SPA942/962)
- Using the SPA932 (Sidecar) with the SPA962
- Configuring the Web Service
- RSS Newsfeeds (SPA962)
- Call Appearances and Extensions
- Line Key LEDs
- Using Call Features
- Selecting the Audio I/O Device and Line
- Making Calls
- Answering and Ending Calls
- Hold and Resume
- Call Waiting
- Speed Dialing
- Three-Way Conferencing
- Attended Call Transfer
- Blind Call Transfer
- Call Back
- Message Waiting Indication (MWI)
- Accessing Voicemail
- Muting Calls
- Shared Call Appearances
- Personal Directory
- Caller and Called Name Matching
- Dialing Assistance
- Supplementary Services
- Call Logs
- Audio Volume Adjustment
- Managing Ring Tones
- Configuring a Dial Plan
- System Administration
- Troubleshooting FAQ
- SPA900 Series LCD Command Reference
- Entering Names and Numbers into the Directory
- Entering Directory Names, Numbers and Ring Default
- 2 Speed Dial
- 3 Call History
- 4 Ring Tone
- 5 Preferences
- 6 Call Forward
- 7 Time/Date
- 8 Voice Mail
- 9 Network
- 9.1 DCHP
- 9.2 Current IP Address
- 9.3 Host Name
- 9.4 Domain
- 9.5 Current NetMask
- 9.6 Current Gateway
- 9.7 Enable Web Server
- 9.8 Non DHCP IP Address
- 9.9 Non DHCP Subnet Mask
- 9.10 Non DHCP Default Route
- 9.11 Non DHCP DNS 1
- 9.12 Non DHCP DNS 2
- 9.13 Non DHCP NTP Server 1
- 9.14 Non DHCP NTP Server 2
- 9.15 Multicast Address
- 9.16 Enable VLAN
- 9.17 VLAN ID
- 9.18 CDP
- 10 Product Info
- 11 Status
- 12 Reboot
- 13 Restart
- 14 Factory Reset
- 15 Custom Reset
- 16 Set Password
- 17 Set LCD Contrast
- 18 CallPark Status
- 19 Language (SPA922, 942, and 962)
- 20 GUI Properties (SPA962)
- 21 Web Service (SPA962)
- Linksys IP Phone Field Reference
- Acronyms
- Glossary
5-34
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Phone Tab
Ring Tone
Each entry defines a ring tone to be used on the phone, with an ID between 1 and 10. The ID can be used
in a DirEntry to indicate which ring tone to use when the corresponding caller calls.
Call Pick Up Serv Enable/disable the call pickup service.
Defaults to yes.
ACD Login Serv Enable/disable the ACD Login Service, used for call centers. Typically enabled with the
<SIP-B> parameter.
Defaults to no.
Group Call Pick Up Serv Enable/disable the group call pickup service.
Defaults to yes.
ACD Ext The extension used for handling ACD calls. Select from 1, 2, 3, 4, 5, or 6.
Defaults to 1.
Service Annc Serv Enable/disable sending announcement requests to a customer-supplied announcement server.
Defaults to no.
Web Serv Enable/disable the web server.
Defaults to yes.
Field Description
Field Description
Ring-1 Ring tone script for Ring 1. Defaults to n=Classic-1;w=3;c=1.
Ring-2 Ring tone script for Ring 2. Defaults to n=Classic-2;w=3;c=2.
Ring-3 Ring tone script for Ring 3. Defaults to n=Classic-3;w=3;c=3.
Ring-4 Ring tone script for Ring 4. Defaults to n=Classic-4;w=3;c=4.
Ring-5 Ring tone script for Ring 5. Defaults to n=Simple-1;w=2;c=1.
Ring-6 Ring tone script for Ring 6. Defaults to n=Simple-2;w=2;c=2.
Ring-7 Ring tone script for Ring 7. Defaults to n=Simple-3;w=2;c=3.
Ring-8 Ring tone script for Ring 8. Defaults to n=Simple-4;w=2;c=4.
Ring-9 Ring tone script for Ring 9. Defaults to n=Simple-5;w=2;c=5.
Ring-10 Ring tone script for Ring 10. Defaults to n=Office;w=4;c=1.