Instruction Manual
Table Of Contents
- Preface
- Introducing Linksys IP Phones
- Getting Started
- Managing Linksys IP Phones
- Using the 900 Series LCD Display
- Localization
- Changing the Display Background (SPA942/962)
- Using the SPA932 (Sidecar) with the SPA962
- Configuring the Web Service
- RSS Newsfeeds (SPA962)
- Call Appearances and Extensions
- Line Key LEDs
- Using Call Features
- Selecting the Audio I/O Device and Line
- Making Calls
- Answering and Ending Calls
- Hold and Resume
- Call Waiting
- Speed Dialing
- Three-Way Conferencing
- Attended Call Transfer
- Blind Call Transfer
- Call Back
- Message Waiting Indication (MWI)
- Accessing Voicemail
- Muting Calls
- Shared Call Appearances
- Personal Directory
- Caller and Called Name Matching
- Dialing Assistance
- Supplementary Services
- Call Logs
- Audio Volume Adjustment
- Managing Ring Tones
- Configuring a Dial Plan
- System Administration
- Troubleshooting FAQ
- SPA900 Series LCD Command Reference
- Entering Names and Numbers into the Directory
- Entering Directory Names, Numbers and Ring Default
- 2 Speed Dial
- 3 Call History
- 4 Ring Tone
- 5 Preferences
- 6 Call Forward
- 7 Time/Date
- 8 Voice Mail
- 9 Network
- 9.1 DCHP
- 9.2 Current IP Address
- 9.3 Host Name
- 9.4 Domain
- 9.5 Current NetMask
- 9.6 Current Gateway
- 9.7 Enable Web Server
- 9.8 Non DHCP IP Address
- 9.9 Non DHCP Subnet Mask
- 9.10 Non DHCP Default Route
- 9.11 Non DHCP DNS 1
- 9.12 Non DHCP DNS 2
- 9.13 Non DHCP NTP Server 1
- 9.14 Non DHCP NTP Server 2
- 9.15 Multicast Address
- 9.16 Enable VLAN
- 9.17 VLAN ID
- 9.18 CDP
- 10 Product Info
- 11 Status
- 12 Reboot
- 13 Restart
- 14 Factory Reset
- 15 Custom Reset
- 16 Set Password
- 17 Set LCD Contrast
- 18 CallPark Status
- 19 Language (SPA922, 942, and 962)
- 20 GUI Properties (SPA962)
- 21 Web Service (SPA962)
- Linksys IP Phone Field Reference
- Acronyms
- Glossary
5-23
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
Regional Tab
Cfwd No Ans Act Code Forwards no-answer calls to the extension specified after the activation code.
Defaults to *92.
Cfwd No Ans Deact Code Cancels call forwarding of no-answer calls.
Defaults to *93.
CW Act Code Enables call waiting on all calls.
Defaults to *56.
CW Deact Code Disables call waiting on all calls.
Defaults to *57.
CW Per Call Act Code Enables call waiting for the next call.
Defaults to *71.
CW Per Call Deact Code Disables call waiting for the next call.
Defaults to *70.
Block CID Act Code Blocks caller ID on all outbound calls.
Defaults to *67.
Block CID Deact Code Removes caller ID blocking on all outbound calls.
Defaults to *68.
Block CID Per Call Act Code Blocks caller ID on the next outbound call.
Defaults to *81.
Block CID Per Call Deact Code Removes caller ID blocking on the next inbound call.
Defaults to *82.
Block ANC Act Code Blocks all anonymous calls.
Defaults to *77.
Block ANC Deact Code Removes blocking of all anonymous calls.
Defaults to *87.
DND Act Code Enables the do not disturb feature.
Defaults to *78.
DND Deact Code Disables the do not disturb feature.
Defaults to *79.
Secure All Call Act Code Makes all outbound calls secure.
Defaults to *16.
Secure No Call Act Code Makes all outbound calls not secure.
Defaults to *17.
Field Description