Instruction Manual
Table Of Contents
- Preface
- Introducing Linksys IP Phones
- Getting Started
- Managing Linksys IP Phones
- Using the 900 Series LCD Display
- Localization
- Changing the Display Background (SPA942/962)
- Using the SPA932 (Sidecar) with the SPA962
- Configuring the Web Service
- RSS Newsfeeds (SPA962)
- Call Appearances and Extensions
- Line Key LEDs
- Using Call Features
- Selecting the Audio I/O Device and Line
- Making Calls
- Answering and Ending Calls
- Hold and Resume
- Call Waiting
- Speed Dialing
- Three-Way Conferencing
- Attended Call Transfer
- Blind Call Transfer
- Call Back
- Message Waiting Indication (MWI)
- Accessing Voicemail
- Muting Calls
- Shared Call Appearances
- Personal Directory
- Caller and Called Name Matching
- Dialing Assistance
- Supplementary Services
- Call Logs
- Audio Volume Adjustment
- Managing Ring Tones
- Configuring a Dial Plan
- System Administration
- Troubleshooting FAQ
- SPA900 Series LCD Command Reference
- Entering Names and Numbers into the Directory
- Entering Directory Names, Numbers and Ring Default
- 2 Speed Dial
- 3 Call History
- 4 Ring Tone
- 5 Preferences
- 6 Call Forward
- 7 Time/Date
- 8 Voice Mail
- 9 Network
- 9.1 DCHP
- 9.2 Current IP Address
- 9.3 Host Name
- 9.4 Domain
- 9.5 Current NetMask
- 9.6 Current Gateway
- 9.7 Enable Web Server
- 9.8 Non DHCP IP Address
- 9.9 Non DHCP Subnet Mask
- 9.10 Non DHCP Default Route
- 9.11 Non DHCP DNS 1
- 9.12 Non DHCP DNS 2
- 9.13 Non DHCP NTP Server 1
- 9.14 Non DHCP NTP Server 2
- 9.15 Multicast Address
- 9.16 Enable VLAN
- 9.17 VLAN ID
- 9.18 CDP
- 10 Product Info
- 11 Status
- 12 Reboot
- 13 Restart
- 14 Factory Reset
- 15 Custom Reset
- 16 Set Password
- 17 Set LCD Contrast
- 18 CallPark Status
- 19 Language (SPA922, 942, and 962)
- 20 GUI Properties (SPA962)
- 21 Web Service (SPA962)
- Linksys IP Phone Field Reference
- Acronyms
- Glossary
5-15
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 5 Linksys IP Phone Field Reference
SIP Tab
INFOREQ Dynamic Payload
(not applicable to SPA901)
INFOREQ dynamic payload type.
Defaults to blank.
G726r16 Dynamic Payload G.726-16 dynamic payload type. Ranges from 96-127.
Defaults to 98.
G726r24 Dynamic Payload G.726-24 dynamic payload type. Ranges from 96-127.
Defaults to 97.
G726r32 Dynamic Payload
(not applicable to SPA901)
G726r32 dynamic payload type.
Defaults to 2.
G726r40 Dynamic Payload G.726-40 dynamic payload type. Ranges from 96-127.
Defaults to 96.
G729b Dynamic Payload G.729b dynamic payload type. Ranges from 96-127.
Defaults to 99.
EncapRTP Dynamic Payload
(not applicable to SPA901)
EncapRTP Dynamic Payload type.
Defaults to 112.
RTP-Start-Loopback Dynamic
(not applicable to SPA901)
RTP-Start-Loopback Dynamic Payload.
Defaults to 113.
RTP-Start-Loopback Codec
(not applicable to SPA901)
RTP-Start-Loopback Codec. Select one of following: G711u, G711a, G726-16, G726-24,
G726-32, G726-40, G729a, or G723.
Defaults to G711u.
AVT Codec Name
(not applicable to SPA901)
AVT codec name used in SDP.
Defaults to telephone-event.
G711u Codec Name
(not applicable to SPA901)
G.711u codec name used in SDP.
Defaults to PCMU.
G711a Codec Name
(not applicable to SPA901)
G.711a codec name used in SDP.
Defaults to PCMA.
G726r16 Codec Name
(not applicable to SPA901)
G.726-16 codec name used in SDP.
Defaults to G726-16.
G726r24 Codec Name
(not applicable to SPA901)
G.726-24 codec name used in SDP.
Defaults to G726-24.
G726r32 Codec Name
(not applicable to SPA901)
G.726-32 codec name used in SDP.
Defaults to G726-32.
G726r40 Codec Name
(not applicable to SPA901)
G.726-40 codec name used in SDP.
Defaults to G726-40.
Field Description