Instruction Manual
Table Of Contents
- Preface
- Introducing Linksys IP Phones
- Getting Started
- Managing Linksys IP Phones
- Using the 900 Series LCD Display
- Localization
- Changing the Display Background (SPA942/962)
- Using the SPA932 (Sidecar) with the SPA962
- Configuring the Web Service
- RSS Newsfeeds (SPA962)
- Call Appearances and Extensions
- Line Key LEDs
- Using Call Features
- Selecting the Audio I/O Device and Line
- Making Calls
- Answering and Ending Calls
- Hold and Resume
- Call Waiting
- Speed Dialing
- Three-Way Conferencing
- Attended Call Transfer
- Blind Call Transfer
- Call Back
- Message Waiting Indication (MWI)
- Accessing Voicemail
- Muting Calls
- Shared Call Appearances
- Personal Directory
- Caller and Called Name Matching
- Dialing Assistance
- Supplementary Services
- Call Logs
- Audio Volume Adjustment
- Managing Ring Tones
- Configuring a Dial Plan
- System Administration
- Troubleshooting FAQ
- SPA900 Series LCD Command Reference
- Entering Names and Numbers into the Directory
- Entering Directory Names, Numbers and Ring Default
- 2 Speed Dial
- 3 Call History
- 4 Ring Tone
- 5 Preferences
- 6 Call Forward
- 7 Time/Date
- 8 Voice Mail
- 9 Network
- 9.1 DCHP
- 9.2 Current IP Address
- 9.3 Host Name
- 9.4 Domain
- 9.5 Current NetMask
- 9.6 Current Gateway
- 9.7 Enable Web Server
- 9.8 Non DHCP IP Address
- 9.9 Non DHCP Subnet Mask
- 9.10 Non DHCP Default Route
- 9.11 Non DHCP DNS 1
- 9.12 Non DHCP DNS 2
- 9.13 Non DHCP NTP Server 1
- 9.14 Non DHCP NTP Server 2
- 9.15 Multicast Address
- 9.16 Enable VLAN
- 9.17 VLAN ID
- 9.18 CDP
- 10 Product Info
- 11 Status
- 12 Reboot
- 13 Restart
- 14 Factory Reset
- 15 Custom Reset
- 16 Set Password
- 17 Set LCD Contrast
- 18 CallPark Status
- 19 Language (SPA922, 942, and 962)
- 20 GUI Properties (SPA962)
- 21 Web Service (SPA962)
- Linksys IP Phone Field Reference
- Acronyms
- Glossary
4-17
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 4 SPA900 Series LCD Command Reference
16 Set Password
16 Set Password
Shortcut:: Setup, 16, password, ok
This option lets you set a password to protect the phone from unauthorized use. To select this option,
press the Setup button and press 15, or scroll down until the selection is highlighted and press the select
soft key.
When the LCD displays New Password, enter the password and press the save soft key.
Caution If the password is lost, to recover the phone you must perform a factory reset. A factory reset erases all
current settings, including the directory and call logs.
17 Set LCD Contrast
Shortcut:: Setup, 17, scroll knob left or right, save
This option lets you adjust the LCD contrast. To use this option, press the Setup button and press 16
scroll down to highlight this option and press the select soft key.
Press the Navigation button right or left to adjust the LCD contrast up or down. Press the save soft key
when finished, or the cancel soft key to keep the previously selected LCD contrast.
18 CallPark Status
Shortcut: Setup, 18
This option lets you display the status of the CallPark feature. When this option is selected, the LCD
displays the Requesting CallPark Status message.
The LCD then displays the CallPark Status or displays the Request CallPark Status Failed message and
the request is retried.
To cancel the request press Cancel.
19 Language (SPA922, 942, and 962)
Shortcut:: Setup, 19, Edit, Option, OK, Save
This option is available only with Release 5.1.4 or later of the SPA922, SPA942, and SPA962. This
option lets you change the language of the phone:
1. Press the Setup button.
2. Select Language (option 18).
3. Select Edit to change language.
4. Select Option to change the language.
5. Select OK and Save.
Dictionaries are currently available for the following languages:
• English