Instruction Manual
Table Of Contents
- Preface
- Introducing Linksys IP Phones
- Getting Started
- Managing Linksys IP Phones
- Using the 900 Series LCD Display
- Localization
- Changing the Display Background (SPA942/962)
- Using the SPA932 (Sidecar) with the SPA962
- Configuring the Web Service
- RSS Newsfeeds (SPA962)
- Call Appearances and Extensions
- Line Key LEDs
- Using Call Features
- Selecting the Audio I/O Device and Line
- Making Calls
- Answering and Ending Calls
- Hold and Resume
- Call Waiting
- Speed Dialing
- Three-Way Conferencing
- Attended Call Transfer
- Blind Call Transfer
- Call Back
- Message Waiting Indication (MWI)
- Accessing Voicemail
- Muting Calls
- Shared Call Appearances
- Personal Directory
- Caller and Called Name Matching
- Dialing Assistance
- Supplementary Services
- Call Logs
- Audio Volume Adjustment
- Managing Ring Tones
- Configuring a Dial Plan
- System Administration
- Troubleshooting FAQ
- SPA900 Series LCD Command Reference
- Entering Names and Numbers into the Directory
- Entering Directory Names, Numbers and Ring Default
- 2 Speed Dial
- 3 Call History
- 4 Ring Tone
- 5 Preferences
- 6 Call Forward
- 7 Time/Date
- 8 Voice Mail
- 9 Network
- 9.1 DCHP
- 9.2 Current IP Address
- 9.3 Host Name
- 9.4 Domain
- 9.5 Current NetMask
- 9.6 Current Gateway
- 9.7 Enable Web Server
- 9.8 Non DHCP IP Address
- 9.9 Non DHCP Subnet Mask
- 9.10 Non DHCP Default Route
- 9.11 Non DHCP DNS 1
- 9.12 Non DHCP DNS 2
- 9.13 Non DHCP NTP Server 1
- 9.14 Non DHCP NTP Server 2
- 9.15 Multicast Address
- 9.16 Enable VLAN
- 9.17 VLAN ID
- 9.18 CDP
- 10 Product Info
- 11 Status
- 12 Reboot
- 13 Restart
- 14 Factory Reset
- 15 Custom Reset
- 16 Set Password
- 17 Set LCD Contrast
- 18 CallPark Status
- 19 Language (SPA922, 942, and 962)
- 20 GUI Properties (SPA962)
- 21 Web Service (SPA962)
- Linksys IP Phone Field Reference
- Acronyms
- Glossary
4-14
Linksys IP Phone Administrator Guide
Firmware Version 5.1
Chapter 4 SPA900 Series LCD Command Reference
11 Status
10.4 Hardware Version
Shortcut: Setup, 10, 4, select
To view the hardware version, press 4 from the Product Info menu or scroll down to highlight Hardware
Version and press the select soft key.
.10.5 MAC Address
Shortcut: Setup, 10, 5, select
To view the MAC address, press 5 from the Product Info menu or scroll down to highlight MAC
Address and press the select soft key. The MAC address is also printed on the bottom of the phone.
.10.6 Client Cert
Shortcut: Setup, 10, 6, select
The phone can be configured for secure provisioning using the factory-installed security certificate. To
determine if the Client Certificate is installed on the phone, press 6 from the Product Info menu, or
scroll down to the highlight Client Cert, and press the select soft key.
10.7 Customization
Shortcut: Setup, 10, 7, select
The phone can be configured for customization. Press 7 from the Product Info menu, or scroll down to
the highlight Customization, and press the select soft key. “Open” indicates that the phone can be
customized.
11 Status
To view the status of the phone and extension parameters, press the Setup button and press 11, or scroll
down until Status is highlighted and then press the select soft key. This menu displays read-only
information about the status of the phone and provides the following options.
Note On the SPA962 phone, “EXT” appears as “Ext,” and “Line” appears as “Line Key.”
• Phone
• EXT 1
• EXT 2
• EXT 3
• EXT 4
• Line 1
• Line 2
• Line 3
• Line 4