User Guide USB Ethernet Adapter Model: USB3GIG
Linksys About This Guide About This Guide Online Resources Resource Website Linksys www.linksys.com Linksys International www.linksys.com/international Glossary www.linksys.com/glossary Network Security www.linksys.com/security Copyright and Trademarks Linksys, Belkin and the Linksys Logo are registered trademarks or trademarks of Belkin International, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright ©2014 Belkin International, Inc. All rights reserved.
Linksys Table of Contents Table of Contents CHAPTER 1 QUICK START GUIDE . . . . . . . . . . . . . . . . 1 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installing the Adapter . . . . . . . . . . . . . . . . . . . . . . . . 1 CHAPTER 2 DRIVER INSTALLATION . . . . . . . . . . . . .
Linksys CHAPTER 1 Product Overview CHAPTER 1 Product Overview Thank you for choosing the Linksys USB Ethernet Adapter. This adapter lets you easily connect any device with a USB port – such as your computer, game console, or DVR – to a wired network. Small and light, yet rugged enough for travel, the adapter keeps you connected almost everywhere you go. LEDs Installing the Adapter 1. Remove the caps from the adapter to expose the USB and Ethernet ports. 2.
Linksys Chapter 2: Driver Installation Chapter 2: Driver Installation 4. Select Next to advance to the next screen After physically connecting the adapter to your computer’s USB port or hub, follow these instructions to install the hardware device driver. The installation procedures for the hardware device driver vary depending on your computer’s operating system, so make sure to follow the instructions for your operating system.
Linksys 6. When the driver is finished installing, click Finish Chapter 2: Driver Installation 3. Open up the CD’s folder followed by the MAC folder 4. Open the Installer file 5. Follow the steps in the Installer application, when the installation is complete you will be asked to restart your Mac. Click the Restart button to finish setup. That’s it. You’re done with installation of the USB Ethernet Adapter.
Linksys Chapter 2: Driver Installation When your Mac restarts you’re done with installation of the USB Ethernet Adapter. For more information about networking under OS X, refer to your Mac OS X documentation.
Linksys Appendix A: Troubleshooting Appendix A: Troubleshooting Your computer does not recognize the adapter. Make sure that the adapter is properly inserted into the USB slot. The adapter does not work properly. Remove the adapter, and reinsert it into the computer’s USB slot. WEB: If your questions are not addressed here, refer to the Linksys website, www.linksys.
Linksys Appendix B: Specifications Appendix B: Specifications Model Storage Temp. USB3GIG USB Ethernet Adapter 32 to 158ºF (0 to 70ºC) Standards Operating Humidity USB 1.0, USB 1.1, USB 2.0, USB 3.0 10 to 90% Noncondensing IEEE 802.3, IEEE 802.
Visit linksys.com/support for award-winning technical support © 2014 Belkin International, Inc. and/or its affiliates. All rights reserved. BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. LNKPG-00103 Rev.
