Owner's Manual

14
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Driver Installation for Windows Millenium
Compact USB 2.0 10/100 Network Adapter
12. A Logon screen will appear and require you to enter a User Name and Password. Make up a user name and
password (if you haven’t already), and click the OK button. Do not click the Cancel button, or press the Escape
[ESC] key, because this will prevent you from logging into the network. If the logon does not appear or if it
does not allow you to log on, refer to the “Appendix A: Troubleshooting.”
13. When you are at the Windows Millennium desktop, double-click on the Network Neighborhood icon. You
should see one icon for the entire network and the names of the other PCs on the network.
• If you can see your computer along with all the other computers on the network in Network
Neighborhood, then the Windows Millennium network configuration is complete.
NOTE: Refer to the “Appendix A: Troubleshooting” if you run into any problems, such as:
• If you don't see anything at all in Network Neighborhood after pressing the F5 key on
your keyboard a few times to refresh the screen.
• If you only see your own computer in Network Neighborhood.
• If you see all computers on the network except yours after pressing the F5 key a few
times.
• If you only see computers that are running the same operating system as you and you
don’t see any other computers.