Switch User Manual

Chapter 5
Advanced Configuration
50
8-Port 10/100 Ethernet Switch with Webview
performed via HMAC-SHA-96 authentication.
Password Define the local user password. Local user
passwords can contain up to 159 characters.
Authentication Key Defines the HMAC-MD5-96 or
HMAC-SHA-96 authentication level. The authentication
and privacy keys are entered to define the authentication
key. If only authentication is required, 16 bytes are defined.
If both privacy and authentication are required, 32 bytes
are defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a
period or a colon.
Privacy Key Defines the Privacy Key (LSB). If only
authentication is required, 20 bytes are defined. If both
privacy and authentication are required, 36 bytes are
defined. Each byte in hexadecimal character strings is
two hexadecimal digits. Each byte can be separated by a
period or colon.
The Add to List button adds the Group Membership
configuration to the respective table at the bottom of the
screen.
SNMP > Communities
The Communities screen contains three areas,
Communities, Basic Table and Advanced Table.
SNMP > Communities
SNMP Management Station Defines the management
station IP address for which the advanced SNMP
community is defined. There are two definition options:
Define the management station IP address. •
All • Includes all management station IP addresses.
Community String Defines the password used to
authenticate the management station to the device.
Basic Enables SNMP Basic mode for a selected community
and contains the following fields:
Access Mode Defines the access rights of the community.
The possible field values are:
Read Only • Management access is restricted to read-
only, and changes cannot be made to the community.
Read Write • Management access is read-write and
changes can be made to the device configuration, but
not to the community.
SNMP Admin • User has access to all device
configuration options, as well as permissions to modify
the community.
View Name Contains a list of user-defined SNMP views.
Advanced Enables SNMP Advanced mode for a selected
community and contains the following fields:
Group Name Defines advanced SNMP communities
group names.
The Add to List button adds the Communities
configuration to the respective Table at the bottom of the
screen.
Base Table
Management Station Displays the management station
IP address for which the basic SNMP community is
defined.
Community String Displays the password used to
authenticate the management station to the device.
Access Mode Displays the access rights of the
community.
View Name Displays the user-defined SNMP view.
SNMP > Table