QUICK INSTALLATION GUIDE Linksys Business Series 24-port Fast Ethernet Switch Model SFE2000
Linksys Business Series Fast Ethernet Switch
Linksys Business Series SFE2000 Fast Ethernet Switch 180772 Linksys Business Series SFE2000 Fast Ethernet Switch 1
Linksys Business Series SFE2000 Fast Ethernet Switch 2 Install: Desktop
TM Linksys Business Series SFE2000 Fast Ethernet Switch 140988 Install: Wall 3
180911 Linksys Business Series SFE2000 Fast Ethernet Switch TM 4 Install: Wall
Linksys Business Series SFE2000 Fast Ethernet Switch Install: Rack 5
Linksys Business Series SFE2000 Fast Ethernet Switch 6 Connect Data Devices
Linksys Business Series SFE2000 Fast Ethernet Switch Connect Linksys One Devices 7
Linksys Business Series SFE2000 Fast Ethernet Switch 8 Connect to Power
180777 Before setting up stacked switches in your network, see the technical bulletin, “Linksys Stackable Switches: How to Build Stacks and Understand Their Operation,” available at www.linksys.com.
Install: Stack 180778 Linksys Business Series SFE2000 Fast Ethernet Switch 10 Warning Use only ports G1/G2 for stacking. If you manually assign a Unit ID to one unit, you should manually assign Unit IDs to all units. Using both system-assigned and manually-assigned IDs in your network can impact system performance.
Linksys Business Series SFE2000 Fast Ethernet Switch Connect Data Devices 11
180780 Linksys Business Series SFE2000 Fast Ethernet Switch 12 Connect to Power
Regulatory Compliance and Safety Information The Linksys One SFE2000 Fast Ethernet switch meets the following regulatory compliance and safety standards: Regulatory Compliance Safety Description Products with the CE Marking indicate compliance with the 89/336/EEC and 73/23/EEC directives, which include the safety and EMC standards listed below. UL 60950-1 IEC60950-1 CB / TUV/Rh CSA-C22.2 No.
Federal Communication Commission Interference Statement This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Dimensions 17.32" x 1.73" x 14.70" (440 mm x 44 mm x 375 mm) Unit Weight 9.68 lbs. or 154.85 oz (4.39 kg) Power 48 VDC, 100-240V 1.5A Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47), Class A EN60950 (2001) Security ACL, 802.
Safety Information Linksys Business Series SFE2000 Fast Ethernet Switch The following statements are warnings or safety guidelines. A warning means danger. You are in a situation that could cause bodily injury. Before working on equipment, be aware of the hazards involved with electrical circuitry and standard safety practices to prevent accidents. Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury.
Warning Installation Instructions Read the installation instructions before connecting the system to the power source. SELV Circuit To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.
Warning Comply with Local National Electrical Codes Installation of the equipment must comply with local and national electrical codes. Linksys Business Series SFE2000 Fast Ethernet Switch Warning Product Disposal Ultimate disposal of this product should be handled according to all national laws and regulations.
Power Safety Warnings Warning TN Power The device is designed to work with TN power systems. Warning Ground Conductor Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.
Warning Power Supply Installation Warning The power supply must be placed indoors. Linksys Business Series SFE2000 Fast Ethernet Switch Warning Circuit Breaker This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 120 VAC, 15A U.S.
Linksys Software License Agreement v.2.14.05 Only use the Linksys-specified power supply. Refer to the installation manual provided with this product. THIS LICENSE AGREEMENT IS BETWEEN YOU AND CISCO-LINKSYS LLC (“Linksys”). BY DOWNLOADING OR INSTALLING THE SOFTWARE, OR USING THE PRODUCT CONTAINING THE SOFTWARE, YOU ARE CONSENTING TO BE BOUND BY THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THESE TERMS, THEN YOU MAY NOT DOWNLOAD, INSTALL OR USE THE SOFTWARE.
Open Source Software. The GPL source code incorporated into the Software is available for free download at http://www.linksys.com/gpl. If You would like a copy of the GPL source code in this Software on a CD, Linksys will mail to You a CD with such code for $9.99 plus the cost of shipping upon request. Linksys Business Series SFE2000 Fast Ethernet Switch Term and Termination. You may terminate this License at any time by destroying all copies of the Software and documentation.
Limited Warranty This limited warranty is non-transferable and extends only to the original end-user purchaser. Your exclusive remedy and Linksys' entire liability under this limited warranty will be for Linksys, at its option, to (a) repair the product with new or refurbished parts, (b) replace the product with a reasonably available equivalent new or refurbished Linksys product, or (c) refund the purchase price of the product less any rebates.
include or be bundled with third party software or service offerings. This limited warranty shall not apply to such third party software or service offerings. This limited warranty does not guarantee any continued availability of a third party's service for which this product's use or operation may require.
risk. You must include the RMA number and a copy of your dated proof of original purchase when returning your product. Products received without a RMA number and dated proof of original purchase will be rejected. Do not include any other items with the product you are returning to Linksys. Defective product covered by this limited warranty will be repaired or replaced and returned to you without charge.
©2007 Cisco Systems, Inc. All rights reserved. Linksys is a registered trademark and the Linksys One logo is a trademark of Cisco Systems, Inc.
