Owner's Manual
47
Appendix A: Troubleshooting
Frequently Asked Questions
Wired Broadband Router
the same time, even if on the same LAN (not a problem with 1.0.1.3). As far as hosting games, the HL server does 
not need to be in the DMZ. Just forward port 27015 to the local IP address of the server computer. 
How can I block corrupted FTP downloads?
If you are experiencing corrupted files when you download a file with your FTP client, try using another FTP 
program.
The web page hangs; downloads are corrupt, or nothing but junk characters are being displayed on the 
screen. What do I need to do?
Force your Ethernet adapter to 10Mbps or half duplex mode, and turn off the “Auto-negotiate” feature of your 
Ethernet adapter as a temporary measure. (Please look at the Network Control Panel in your Ethernet adapter’s 
Advanced Properties tab.) Make sure that your proxy setting is disabled in the browser. Check our website at 
www.linksys.com for more information.
If all else fails in the installation, what can I do?
Reset the Router by holding down the Reset button for thirty seconds. Then reset your cable or DSL modem by 
powering the unit off and then on.
Will the Router function in a Macintosh environment?
Yes, but the Router’s setup pages are accessible only through Internet Explorer 5.0 or Netscape Navigator 5.0 or 
higher for Macintosh.
I am not able to get the web configuration screen for the Router. What can I do?
You may have to remove the proxy settings on your Internet browser, e.g., Netscape Navigator or Internet 
Explorer. Or remove the dial-up settings on your browser. Check with your browser documentation, and make 
sure that your browser is set to connect directly and that any dial-up is disabled. Make sure that your browser is 
set to connect directly and that any dial-up is disabled. For Internet Explorer, click Tools, Internet Options, and 
then the Connection tab. Make sure that Internet Explorer is set to Never dial a connection. For Netscape 
Navigator, click Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to Direct 
connection to the Internet.
What is DMZ Hosting?
Demilitarized Zone (DMZ) allows one IP address (computer) to be exposed to the Internet. Some applications 
require multiple TCP/IP ports to be open. It is recommended that you set your computer with a static IP if you 
want to use DMZ Hosting. To get the LAN IP address, see “Appendix C: Finding the MAC Address and IP Address 
for Your Ethernet Adapter.”
If DMZ Hosting is used, does the exposed user share the public IP with the Router?
No.










