Manualshelf

Owner's Manual

ManualsBrandsLinksys ManualsHubsLinksys RT41-BU
11121314151617181920
6
Chapter 3: Getting to Know the Router
The Back Panel
Wired Broadband Router
Chapter 3: Getting to Know the Router
The Back Panel
The Router’s ports and the Reset button are located on the back panel of the Router.
Internet This Internet port connects to your cable or DSL modem.
Ethernet 1-4 These four Ethernet ports connect to network devices, such as PCs, print servers, or
additional switches.
Reset Button There are two ways to reset the Router to its factory default settings. Either press the Reset
button for approximately five seconds, or restore the defaults from the Administration tab -
Factory Defaults of the Router's Web-based Utility.
Power The Power port is where you will connect the power adapter.
Figure 3-1: Back Panel
NOTE: If you use the Reset button, the Router’s
settings will be reset to their factory defaults.