Datasheet

B. Insert the USB cable’s Type B con-
nector into the USB port on the
PowerLine USB Adapter.
C. Plug the power cord into the power-
line port on the PowerLine USB
Adapter.
Note: Use only the supplied power cord
to connect the USB Adapter to the
power outlet.
D. Plug the other end of the power
cord into an electrical outlet.
Note: For highest performance, plug the PowerLine USB Adapter’s
power cord directly into a power outlet on the wall. Do not plug the
device into a UPS or power strip with surge protection. The PowerLine
USB Adapter has its own power filter for protection against surges.
PLUSB10
System Requirements
• Pentium-Class 90MHz or Higher
• Minimum 32MB RAM
• USB-Ready PC
• Windows 98, Millennium, 2000, or
XP
• CD-ROM Drive
PPoowweerrLLiinnee UUSSBB
AAddaapptteerr
Instant PowerLine™
Included with the Linksys
PLUSB10 PowerLine USB
Adapter
• Instant PowerLine USB Adapter
(1)
• One Power Cord (2)
• One USB Cable (3)
• One Setup Utility CD-ROM (4)
• One User Guide (5)
• Quick Installation (this document)
and Registration Card (not shown)
Installation Process
For more detailed instructions, please refer to the User Guide.
Note: You must have
Windows 98, 2000,
Millennium, or XP
installed on your PC.
Windows 95 and NT
do not support the
PowerLine USB
Adapter.
A. Insert the Setup Utility CD-ROM into the computer’s CD-ROM
drive. The Setup Utility CD-ROM should run automatically. If it
does not, click the Start button and choose Run. In the box that
appears, enter D:\setup.exe (if “D” is the letter of your CD-ROM
drive).
B. To install the PowerLine USB Adapter, click Next.
C. Enter your User Name and
Organization Name. Select Anyone
who uses this computer (all users)
to install a shortcut to the Security
Configuration Utility on every
user’s desktop (This selection is not
available for Windows 98 and ME
users). Then click the Next button.
Using the Setup Utility CD-ROM
C
D. Click the Install button to begin
installation of the Security
Configuration Utility.
Windows 2000 users: Windows
will inform you that there was no
digital signature found. Click the
Yes button to proceed with the
installation.
Windows XP users: Windows will notify you that the driver has not
passed Windows Logo testing. Click the Continue Anyway button.
E. Click the Finish button to exit.
F. Eject the Setup Utility CD-ROM
from the CD-ROM drive.
A. Insert the end of the USB cable with
the Type A connector (rectangular)
into the computer’s USB port.
A
B
Continue to Step 3
Connecting the PowerLine USB
Adapter to Your PC
WWW.LINKS YS .C O M
Your hardware installation is complete. For
setup information or any other questions,
refer to the User Guide.
This Quick Installation is meant to help you install the USB Adapter quickly and easily. For detailed instructions on installa-
tion and configuration and further setup options, please consult the User Guide.
E
C
D
D