Bridge & USB Adapter User Guide

EtherFast
®
10/100 Bridge and USB Adapter
8. Click the Finish button to exit the InstallShield Wizard.
9. You will be asked to restart your computer. Click the Ye s button to restart
now, or click the No button to restart later.
The installation of the EtherFast 10/100 Bridge is complete.
Proceed to Chapter 10: Using the Instant PowerLine Security
Configuration Utility.
15
Instant PowerLine
TM
Series
6. You will see Figure 6-8. Proceed to Chapter 7: Connecting the EtherFast
10/100 Bridge. After installing the Bridge hardware, click the OK button.
7. If the 10/100 Bridge is connected to the PC as shown in the diagram (see
Figure 6-9), click the Ye s button. Otherwise, click the No or Not Sure button.
14
Figure 6-8
Figure 6-10
Figure 6-9
Figure 6-11