User guide

Chapter 7
Advanced Configuration
38
Media Hub
Change System Date
Current Media Hub Date • The current date and time
are displayed.
There are two ways to change the date, the calendar or
drop-down menus.
Calendar • Use the arrow buttons to move to the
correct month. Then select the correct day.
Year • Select the correct year.
Month • Select the correct month.
Day • Select the correct day.
Hour • Select the correct hour (displayed in 24-hour
format).
Minute • Select the correct minute.
Click Submit to save your changes, or click Cancel to
cancel your changes.
Device Language The current language of the Media
Browser and web-based utility is displayed.
Change Click this option to change the language.
Select Language
Select Language • Select the appropriate language.
Click Submit to save your change, or click Cancel to
cancel your change.
Firmware Update: Latest Firmware Version The latest
available firmware version of the Media Hub is displayed.
Update Click this option to update the firmware.
NOTE: An active Internet connection is
required.
Update Firmware
The Media Hub will search for the latest version.
Click Update to begin the firmware update, or click
Cancel to cancel the update.
WARNING: Do not reboot or power off the
Media Hub during the firmware upgrade, which
may take up to 15 minutes.
Remote Reboot If you want to reboot the Media Hub,
click Reboot.
Confirm Reboot
Click Yes to reboot the Media Hub, or click No to cancel
the reboot.
Disk
Access the disk usage information and disk configuration
settings, which will vary depending on the number of
disks installed.