User guide

Chapter 7
Advanced Configuration
37
Media Hub
Model The model number of the Media Hub is
displayed.
Firmware Version The version number of the firmware
is displayed.
Media Browser Software Version The version number
of the Media Browser software is displayed.
Up Time The number of minutes the Media Hub has been
running is displayed.
Media Hub Name The name of the Media Hub is
displayed.
Workgroup The name of the workgroup is displayed.
Change Click this option to change the name and/or
workgroup.
Change System Name
Media Hub Name • Enter the new name.
Workgroup • Enter the new workgroup name.
Click Submit to save your changes, or click Cancel to
cancel your changes.
IP Address The local IP address of the Media Hub is
displayed.
Change Click this option to change the network
settings.
IP/DNS Configuration
Enable DHCP • If you want to allow your network
router to assign a dynamic IP address to the Media
Hub, select this option. (It is enabled by default.)
If you disable the DHCP server feature, then you
configure static network settings:
IP Address • Enter the local IP address you want to
assign to the Media Hub.
NOTE: If you change the IP address, you may
have to re-assign the drive letter to the Media
Hub. Run the Setup Wizard on the enclosed
CD-ROM (click Connect Computers), or refer to
Windows Help for instructions on how to assign
a drive letter to the Media Hub.
Subnet Mask • Enter the subnet mask of the Media
Hub.
Gateway • Enter the IP address of the gateway.
DNS Server 1 • Enter the IP address of the DNS server.
DNS Server 2 • Enter the IP address of the backup DNS
server.
Click Submit to save your changes, or click Cancel to
cancel your changes.
Change Password You can change the login password
for the web-based utility.
Change Click this option to change the password.
Change Password
Current Password • Enter the current password.
New Password • Enter the new password.
Retype New Password • Enter the new password again
to confirm it.
Click Submit to save your change, or click Cancel to
cancel your change.
System Date The current date and time of the Media
Hub are displayed.
Change Click this option to change the date or time.