Owner's Manual

23
Power
Limit Type
Shows the classification of the powered device. The class defines the
maximum power that can be provided to the powered device. The possible
field values are:
Class 0: The maximum power level at the Power Sourcing Equipment is
15.4 Watts.
Class 1: The maximum power level at the Power Sourcing Equipment is 4.0
Watts.
Class 2: The maximum power level at the Power Sourcing Equipment is 7.0
Watts.
Class 3: The maximum power level at the Power Sourcing Equipment is
15.4 Watts.
Class 4: The maximum power level at the Power Sourcing Equipment is 30
Watts.
Class (User
Select this option to base the power limit on the value configured in the
User
Defined)
Power Limit field.
User Power
Limit
Set the maximum amount of power that can be delivered by a port.
Note: The User Power Limit can only be implemented when the Class value
is set to User-Defined.
Status
Shows the port's PoE status. The possible field values are:
Delivering Power: The device is enabled to deliver power via the port.
Disabled: The device is disabled for delivering power via the port.
Test Fail: The powered device test has failed. For example, a port could not
be enabled and cannot be used to deliver power to the powered device.
Testing: The powered device is being tested. For example, a powered
device is tested to confirm it is receiving power from the power supply.
Searching: The device is currently searching for a powered device.
Searching is the default PoE operational status.
Fault: The device has detected a fault on the powered device when the port
is forced on. For example, the power supply voltage is out of range, a short
occurs, a communication or there is a communication error with PoE
devices, or an unknown error occurs.
Click Apply to save settings.