User manual

34
Chapter 4 Access point Management
Linksys
Factory Default
It’s highly recommended you save your current configuration file before you
restore to factory default settings. To save your current configuration file, click
Maintenance → Configuration Backup/Restore.
Figure 40: Factory Default Screen
Data - Factory Default Screen
Factory Default If Yes radio button is clicked and Save button is pressed,
your current configuration file will be deleted, and the
system will reboot. The access point will go back to
factory default mode after reboot.
Reboot
Reboot power cycles the device. The current configuration file will remain after
reboot.
Figure 41: Reboot Screen
Data - Reboot Screen
Device Reboot If Yes radio button is checked, device will power cycle after
Save button is pressed.