User manual

29
Chapter 3 Operation and Status
Linksys
Wireless Status
Wireless Status displays settings and status of wireless radio and SSIDs.
Figure 34: Wireless Status Screen
Data - Wireless Status
Radio Status
Radio Status Indicates whether the radio is enabled.
Mode Current 802.11mode (a/b/g/n) of the radio.
Channel The channel currently in use.
Channel Bandwidth Current channel bandwidth of the radio.
When set to 20 MHz, only the 20 MHz channel
is in use. When set to 40 MHz, Wireless-N
connections will use 40 MHz channel, but
Wireless-B and Wireless-G will still use 20 MHz
channel.
SSID Status
Interface SSID index.
SSID Name Name of the SSID.
Status Status of the SSID, enabled or disabled.
MAC Address MAC Address of the SSID.
VLAN ID VLAN ID of the SSID.
Priority The 802.1p priority of the SSID.
Scheduler State Current scheduler status of the SSID.
N/A
No scheduler is enabled on the SSID, or the
SSID is disabled by administrator.
Active
The SSID is enabled.
Inactive
The SSID is disabled.
Workgroup Bridge Status
Status Status of the Workgroup Bridge: enabled or
disabled.
Local MAC MAC address of the Workgroup Bridge.
Remote SSID SSID of the destination access point on the
other end of the Workgroup Bridge link to
which data is sent and from which data is
received.
Remote MAC MAC address of the destination access point
on the other end of the Workgroup Bridge link
to which data is sent and from which data is
received.
Connection Status Status of the Workgroup Bridge: disabled,
connected or not connect-ed.