User manual

CHAPTER 2 Access Point Setup
Linksys
21
Scheduler Association
Associate defined scheduler profiles with SSIDs.
Figure 26: Scheduler Association Screen
Data - Scheduler Association Screen
Scheduler Association
SSID The index of SSID.
SSID Name The name of the SSID.
Profile Name Choose the profile that is associated with the SSID.
If the profile associated with the SSID is deleted, then the
association will be removed.
If “None” is selected, it means no scheduler profile is
associated.
Interface Status The Status of the SSID. It can be Enabled or Disabled.
Scheduler only works when the SSID is enabled.
Connection Control
Exclude or allow only listed client stations to authenticate with the access point.
Figure 27: Connection Control Screen
Data - Connection Control Screen
SSID Select the desired SSID from the list.
Connection Type Select the option from the drop-down list as desired.
• Local: Choose either Allow only following MAC addresses
to connect to wireless network or Prevent following MAC
addresses from connection to wireless network. You can
enter up to 20 MAC addresses of wireless stations or
choose the MAC address.
• RADIUS
Primary/Backup RADIUS Server - Enter the IP address of the
RADIUS Server.
Primary/Backup RADIUS Server Port – Enter the Port number
of the RADIUS Server.
Primary/Backup Shared Secret - This is shared between
the wireless access point and the RADIUS Server while
authenticating the device attempting to connect.
• Disabled