User manual

CHAPTER 2 Access Point Setup
Linksys
8
Management Access
You can use the Management page to configure the management methods of
the access point.
Figure 12: Management Access Screen
Data - Management Access Screen
Web Access
HTTP HTTP(HyperTextTransferProtocol)isthestandard
for transferring files (text, graphic images and
othermultimediafiles)ontheWorldWideWeb.
Enable to allow Web access by HTTP protocol.
HTTP Port SpecifytheportforHTTP.Itcanbe80(default)or
from1024to65535.
HTTP to HTTPS
Redirect
Enable to redirect Web access of HTTP to HTTPS
automatically.
This field is available only when HTTP access is
disabled.
HTTPS HTTPS (Hypertext Transfer Protocol Secure) can
provide more secure communication with the
SSL/TLS protocol, which support data encryption
to HTTP clients and servers.
Enable to allow Web access by HTTPS protocol.
HTTPS Port SpecifytheportforHTTPS.Itcanbe443(default)
orfrom1024to65535.
From Wireless Enable wireless devices to connect to access
point’s admin page. Disabled by default.
Access Control By default, no IP addressesare prohibited from
accessing the device’s admin page. You can
enable access control and enter specified IP
addresses for access. Four IPv4 and four IPv6
addresses can be specified.
SNMP Settings
SNMP SimpleNetwork ManagementProtocol(SNMP)is
a network monitoring and management protocol.
Enable or disable SNMP function here. Disabled by
default.
Contact Enter contact information for the access point.
The contact includes 1 to 32 characters. Special
characters are allowed.