User Manual
Model LAPAC2600
Standards IEEE 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac
Frequency 2.4 GHz and 5 GHz (concurrent)
MIMO 4x4 with MU-MIMO support
Internal Antenna
4
RF Output Power High Power PA
PoE 802.3at
Wall/Ceiling Mount
4
Gigabit Ethernet
4
Secondary Ethernet Port With Link Aggregation
Security Lock Kensington Lock Slot
LED One System LED
AC Power Adapter 12V/2.5A
Hardware Reset Button
4
Frequency Band and Operating Channels
LAPAC2600 (North America)
2.412 to 2.462 GHz: 11 channels
5.180 to 5.240 GHz: 4 channels
5.745 to 5.825 GHz: 5 channels
LAPAC2600-EU/LAPAC2600-UK (Europe)
2.412 to 2.472 GHz: 13 channels
5.180 to 5.240 GHz: 4 channels
LAPAC2600PRO-AP/LAPAC2600PRO-AU (Asia Pacic)
2.412 to 2.472 GHz: 13 channels
5.180 to 5.240 GHz: 4 channels
5.745 to 5.825 GHz: 5 channels
Receive Sensitivity
2.4 GHz
802.11b @11Mbps: -89dBm, 802.11g @54Mbps: -75dBm, 802.11n 20MHz @MCS7: -72dBm, 802.11n 40MHz: @MCS7 -69dBm
5 GHz
802.11a @54Mbps: -75dBm, 802.11n 20MHz @MCS7: -71dBm, 802.11n 40MHz @MCS7: -68dBm, 802.11ac 20MHz @MCS9: -65dBm, 802.11ac 40MHz @MCS9: -62dBm,
802.11ac 80MHz @MCS9: -59dBm
Physical Dimension (L x W x H)
243.00 x 237.00 x 43.69 mm
(9.57 x 9.33 x 1.72 in)
Weight 848 g (1.87 lb)
Maximum Power Consumption 25W
Operating Temperature 0° to 40°C (32° to 104°F)
Storage Temperature -20° to 70°C (-4° to 158°F)
Operating Humidity 10% to 85% (Non-Condensing)
Storage Humidity 10% to 90% (Non-Condensing)
Regulatory Certication
FCC: 47 CFR FCC Part 15, Subpart B, Class B; 47 CFR FCC Part 15, Subpart C; 47 CFR FCC Part 15, Subpart E
CE: EN55022, Class B; EN61000-3-2; EN61000-3-3; 55024; EN 301 489-1 / EN 301 489-17, Class B; EN 300 328; EN 301 893; EN 62311; EN 50385
Warranty Period Limited Lifetime
© 2016 Belkin International, Inc. and/or its affiliates. All rights reserved. L00770616 Rev. A
Learn more at Linksys.com/business
Hardware Specifications
Model LAPAC2600PRO
Multiple SSIDs 16
VLAN Support
4
Number of VLANs 17
SSID to VLAN Mapping
4
Centralized Management via Clustering
4
Dynamic Channel Selection
4
Captive Portal
4
Workgroup Bridge
4
WDS Bridge
4
IPv6
4
Access Control per SSID IPv4, IPv6, and MAC-based
WEP, WPA, WPA2, 802.1X with RADIUS
4
Rogue AP Detection
4
802.1X Supplicant
4
Channel Isolation
4
WMM
4
Rate Limit
4
Bandwidth Utilization
4
Scheduler
4
Band Steering
4
Beamforming
4
Dual Image Support
4
Management Access Control MAC based
Management Interface Web (http/https), SNMP
Event Notication Local Log, Remote Syslog, and Email Alerts
Network Diagnostics Log, Ping, and Packet Capture
Software Specifications
Specications are subject to change without notice. An active, customer-purchased Internet Service Provider broadband account is required for connection of this access point and other connected
computers and devices to the Internet.
* Maximum performance derived from IEEE Standard 802.11 specications. Actual performance can vary due to a number of factors including lower wireless network capacity, data throughput rate, range,
and coverage. Performance depends on many factors, conditions, and variables, including distance from the access point, volume of network trafc, building materials and construction, operating system
used, mix of wireless products used, interference, and other adverse conditions.
* The standard transmission rates—1733 Mbps (for 5 GHz), 800 Mbps (for 2.4 GHz), or 2.53 Gbps combined —are the physical data rates. Actual data throughput will be lower and may depend on the mix
of wireless products used and external factors.
Belkin, Linksys, WRT and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners.