User Guide
Table Of Contents
- Package Contents
- Access Point Setup Guide
- Setup to manage your access point with Linksys cloud server
- Step 1
- Make sure the access point is powered on and connected with an ethernet cable to your network with internet access. By factory default, the IP address is assigned by a DHCP server. If there is no DHCP server in your network, the default IP address is ...
- Log in to the access point’s browser-based admin tool locally and click the Configure LAN Settings link. Change the IP address or VLAN so the access point can access the internet.
- If the indicator light is off, check that the AC power adapter, or PoE cable, is properly connected on both ends.
- Step 2
- Setup to manage your access point locally with browser-based admin tool
- Setup to manage your access point with Linksys cloud server
- Cloud Management Interface
- Local Management Interface
- Appendix A - Troubleshooting
- Appendix B - About Wireless LANs
- Appendix C - PC and Server Configuration
93
Client Sessions
Go to Configuration > Cluster > Client Sessions to see the status of wireless clients within the
cluster.
The session is the period of time in which a user on a client device (station) with a unique MAC
address maintains a connection with the wireless network. The session begins when the WLAN
client logs on to the network, and the session ends when the WLAN client either logs off
intentionally or loses the connection for some other reason.
When one wireless client of Captive Portal roams from one access point to another in the same
cluster, it need not re-authenticate.
IP Address
IP address of the access point to which the client
connects.
Location
Location of the access point to which the client
connects.
SSID
SSID name of the access point to which the client
connects.
User MAC
MAC address of the client.
Online Time
Displays how long this client has been online since it is
authenticated. Unit is second.
Link Rate
Indicates the link rate of the client. Unit is Mbps.
Signal
The signal strength of the client is displayed. Unit is
dBm.
Rx Total
The total bytes which are received from the client by
the access point. Unit is Byte.