User Guide
Table Of Contents
- Package Contents
- Access Point Setup Guide
- Setup to manage your access point with Linksys cloud server
- Step 1
- Make sure the access point is powered on and connected with an ethernet cable to your network with internet access. By factory default, the IP address is assigned by a DHCP server. If there is no DHCP server in your network, the default IP address is ...
- Log in to the access point’s browser-based admin tool locally and click the Configure LAN Settings link. Change the IP address or VLAN so the access point can access the internet.
- If the indicator light is off, check that the AC power adapter, or PoE cable, is properly connected on both ends.
- Step 2
- Setup to manage your access point locally with browser-based admin tool
- Setup to manage your access point with Linksys cloud server
- Cloud Management Interface
- Local Management Interface
- Appendix A - Troubleshooting
- Appendix B - About Wireless LANs
- Appendix C - PC and Server Configuration
88
SSID
A list of available SSIDs.
SSID Name
The name of the SSID.
Profile Name
Choose the profile that is associated with the SSID.
If the profile associated with the SSID is deleted, then
the association will be removed.
If
None
is selected, it means no profile is associated.
Client Information
Go to Configuration > Captive Portal > Client Information to view the status of wireless clients
that are authenticated by Captive Portal.
MAC Address
MAC address of the client.
IP Address
IP address of the client.
User Name
User name used by the client to log in.
SSID Name
Name of the SSID to which the client is connected.
Online Time
How long the client has been online. Measured in
seconds.