User Guide
Table Of Contents
- Package Contents
- Access Point Setup Guide
- Setup to manage your access point with Linksys cloud server
- Step 1
- Make sure the access point is powered on and connected with an ethernet cable to your network with internet access. By factory default, the IP address is assigned by a DHCP server. If there is no DHCP server in your network, the default IP address is ...
- Log in to the access point’s browser-based admin tool locally and click the Configure LAN Settings link. Change the IP address or VLAN so the access point can access the internet.
- If the indicator light is off, check that the AC power adapter, or PoE cable, is properly connected on both ends.
- Step 2
- Setup to manage your access point locally with browser-based admin tool
- Setup to manage your access point with Linksys cloud server
- Cloud Management Interface
- Local Management Interface
- Appendix A - Troubleshooting
- Appendix B - About Wireless LANs
- Appendix C - PC and Server Configuration
63
Scheduler Association
Go to Configuration > Wireless > Scheduler Association to associate defined scheduler profiles
with SSIDs.
Radio
Wireless Radio
Select the desired radio from the list.
Radio 1 is for 2.4 GHz, and Radio 2 is for 5 GHz.
Scheduler Association
SSID
The index of SSID.
SSID Name
The name of the SSID.
Profile Name
Choose the profile that is associated with the SSID.
If the profile associated with the SSID is deleted, then
the association will be removed.
Option ”None” means no scheduler profile is associated.
Interface Status
The status of the SSID. It can be Enabled or Disabled.
Scheduler only works when the SSID is enabled.