User Guide
Table Of Contents
- Package Contents
- Access Point Setup Guide
- Setup to manage your access point with Linksys cloud server
- Step 1
- Make sure the access point is powered on and connected with an ethernet cable to your network with internet access. By factory default, the IP address is assigned by a DHCP server. If there is no DHCP server in your network, the default IP address is ...
- Log in to the access point’s browser-based admin tool locally and click the Configure LAN Settings link. Change the IP address or VLAN so the access point can access the internet.
- If the indicator light is off, check that the AC power adapter, or PoE cable, is properly connected on both ends.
- Step 2
- Setup to manage your access point locally with browser-based admin tool
- Setup to manage your access point with Linksys cloud server
- Cloud Management Interface
- Local Management Interface
- Appendix A - Troubleshooting
- Appendix B - About Wireless LANs
- Appendix C - PC and Server Configuration
62
Scheduler Operational Status
Status
The operational status of the scheduler.
Reason
The detailed reason for the scheduler operational status.
It includes the following situations.
•
System time is outdated.
Scheduler is inactive because system time is
outdated.
•
Administrative Mode is disabled.
Scheduler is disabled by administrator.
•
Active
Scheduler is active.
Scheduler Profile configuration
New Profile Name
Enter the name for new profile.
Profile Name
Select the desired profile from the list to configure.
Day of the Week
Select the desired day from the list.
Option “None” means this time rule is disabled.
Start Time
Choose the start time.
Finish Time
Choose the finish time.