User Guide
Table Of Contents
- Package Contents
- Access Point Setup Guide
- Setup to manage your access point with Linksys cloud server
- Step 1
- Make sure the access point is powered on and connected with an ethernet cable to your network with internet access. By factory default, the IP address is assigned by a DHCP server. If there is no DHCP server in your network, the default IP address is ...
- Log in to the access point’s browser-based admin tool locally and click the Configure LAN Settings link. Change the IP address or VLAN so the access point can access the internet.
- If the indicator light is off, check that the AC power adapter, or PoE cable, is properly connected on both ends.
- Step 2
- Setup to manage your access point locally with browser-based admin tool
- Setup to manage your access point with Linksys cloud server
- Cloud Management Interface
- Local Management Interface
- Appendix A - Troubleshooting
- Appendix B - About Wireless LANs
- Appendix C - PC and Server Configuration
60
Trusted AP List
Action
Click Untrust to move the AP to the Rogue AP List.
MAC Address
The MAC address of the Trusted AP.
SSID
The SSID of the Trusted AP.
Channel
The channel of the Trusted AP.
Security
The security method of the Trusted AP.
Signal
The signal level of the Trusted AP.
New MAC
Address
Add one trusted AP by MAC address.