User Guide
Table Of Contents
- Package Contents
- Access Point Setup Guide
- Setup to manage your access point with Linksys cloud server
- Step 1
- Make sure the access point is powered on and connected with an ethernet cable to your network with internet access. By factory default, the IP address is assigned by a DHCP server. If there is no DHCP server in your network, the default IP address is ...
- Log in to the access point’s browser-based admin tool locally and click the Configure LAN Settings link. Change the IP address or VLAN so the access point can access the internet.
- If the indicator light is off, check that the AC power adapter, or PoE cable, is properly connected on both ends.
- Step 2
- Setup to manage your access point locally with browser-based admin tool
- Setup to manage your access point with Linksys cloud server
- Cloud Management Interface
- Local Management Interface
- Appendix A - Troubleshooting
- Appendix B - About Wireless LANs
- Appendix C - PC and Server Configuration
22
Details
MAC address—Client MAC address
Name—Custom client label
Notes—Client note or description
First seen—The first time the client connected
Last seen—Last seen client date
Connection
Duration—How long the client has been connected
Traffic—The speed of the connection
Signal—The strength of the connection
Last seen—The last time the client was connected
Wireless Name—The Wi-Fi SSID the client connected to
Device IP address—The client’s IP address