User's Manual

65
If there is no DHCP Server found, the wireless access point will roll back to
an IP address and mask of 192.168.1.252 and 255.255.255.0.
Problem 2:
My PC can't connect to the LAN via the wireless access point.
Solution 2:
Check the following:
The SSID and security settings on the PC match the settings on the
wireless access point.
On the PC, the wireless mode is set to "Infrastructure"
If using the Access Control feature, the PC's name and address is in the
Trusted Stations list.
If using 802.1x mode, ensure the PC's 802.1x software is configured
correctly. See Chapter 4 for details of setup for the Windows XP
802.1x client. If using a different client, refer to the vendor's docu-
mentation.