User's Manual

Remote MAC

Address

Normally, Workgroup Bridge connects to a remote access point by

matching SSID. When more than one remote access point have the

same SSID, Workgroup Bridge can connect to different remote access

points.

Optional: You can specify the MAC address of the remote access point

to limit Workgroup Bridge’s connection to a specific remote access

point.

The format is xx:xx:xx:xx:xx:xx.

VLAN ID

Enter the VLAN ID for Workgroup Bridge.

When VLAN function is enabled, Workgroup Bridge only forwards

packets with specified VLAN to remote access points.

The list is only applicable when VLAN function is enabled.

Security Mode

Select the desired mode from the list.

• Disabled

• WPA-Personal

• WPA2-Personal